Atlas 414A Commercial Grade 4-Post Alignment Lift 14,000 lb.

Part Number: ATEATPK-414A-FPD
Price: $5,695.00
Ships Direct From Manufacturer

The Atlas 414A 14,000 pound capacity four post lifts are designed and built to commercial grade standards and will provide many years of service. Each Atlas 414A alignment lift includes a set of front turntables. The turntables can be set in different positions on the runway to accommodate a wide variety of wheelbases. The slip plates are built into the runways and are level with the front turntables. There are included metal cover plates to cover the turntables so the vehicle is not sitting on the turntable if the lift is not being used for alignment.

The Atlas 414A uses a high strength cable system powered by a 220 volt (single phase) power unit to raise and lower the lift.

  • Commercial Grade
  • Powder Coat Finish
  • Alignment Slip Plates and Turntables
  • Pneumatic Single-Point Lock Release
  • Diamond Plated Runway Surface
  • Mounting Hardware
  • Capacity: 14,000 lbs.
  • Lifting Height: 69-1/4"
  • Overall Width of Columns (without Motor): 127"
  • Overall Width of Columns (w/Motor): 139"
  • Overall Length with Approach Ramp: 256-1/2"
  • Overall Length w/o Approach Ramp: 217-3/8"
  • Length Between Columns: 196"
  • Runway Length: 207"
  • Runway Width: 22"
  • Thickness of Runway: 7"
  • Width Between Runways: 45"
  • Width Between Runway Rails: 41-1/2"
  • Outside Runway to Outside Runway: 86"
  • Clearnace Under Runways: 62-3/4"
  • Clearance Cetween Columns: 116"
  • Height of Columns: 86"
  • Maximum Wheel Base: 186"
  • Drive Through: 102"
  • Motor/Electrical Requirement: 220 Volt, Single Phase, A 30 amp Breaker is Recommended