Atlas 412A Commercial Grade 4-Post Alignment Lift 12,000 lb.

Part Number: ATEATPK-412A-FPD
Price: $5,095.00
Ships Direct From Manufacturer

The Atlas 412A 12,000 pound capacity four post lift is designed and built to commercial grade standards and will provide many years of service. Each Atlas 412A alignment lift includes a set of front turntables. The turntables can be set in different positions on the runway to accommodate a wide variety of wheelbases.

The slip plates are build into the runways and are level with the front turntables. Metal cover plates are included so the vehicle is not sitting on the turntable if the lift is not being used for alignment.

The Atlas 412A uses a high strength cable system (with a under runway oversized hydraulic cylinder) powered by a 220 volt (single phase) power unit to raise and lower the lift.

  • Commercial Grade
  • Powder Coat Finish
  • Alignment Slip Plates and Turntables
  • Pneumatic Single-Point Lock Release
  • Diamond Plated Runway Surface
  • Mounting Hardware
  • Capacity: 12,000 lbs.
  • Lifting Height: 75-1/2"
  • Overall Width of Columns (w/o Motor): 126"
  • Overall Width of Columns (w/ Motor): 135"
  • Overall Length with Approach Ramp: 230"
  • Overall Length Without Approach Ramp: 200"
  • Length Between Columns: 184-1/2"
  • Runway Length: 186-1/2"
  • Runway Width: 22"
  • Thickness of Runway: 7"
  • Width Between Runways: 44-1/2"
  • Width Between Runway Rails: 42"
  • Outside Runway to Outside Runway: 84-3/4"
  • Clearance Under Runways: 68-1/4"
  • Clearance Between Columns: 112-1/4"
  • Height of Columns: 82"
  • Maximum Wheel Base: 185"
  • Drive Through: 98-1/2"
  • Motor/Electrical Requirement: 220 Volt, Single Phase, A 30 amp Breaker is Recommended
Loading...