Are you looking for:

Jump-N-Carry 12/24 Volt Jump Starter - 3400 Peak, 850 Cranking in 12V
Features and Benefits
  • Delivers 3400 Peak Amps of jump starting power in 12 Volt mode, and 1700 Peak Amps of jump starting power in 24 Volt mode
  • Long, 46" #2 gauge cables allow convenient positioning of the unit during jump starting, while Industrial-Grade Hot Jaw clamps penetrate battery terminal corrosion and provide maximum power transfer
  • Automatic recharging using an onboard fully automatic battery charger
  • Battery status indicator gauge
  • Assembled in the USA with US and imported components
The versatility of 12 and 24 Volt jump starting in a single, heavy-duty unit. Dual Clore PROFORMER batteries power the JNC1224 to 3400 Peak Amps in 12 Volt mode. With an easy change between voltage settings using quick connects, and an onboard automatic charger, it is as convenient as it is powerful. Includes DC outlet to power 12 volt accessories and a 1 year limited warranty.

Supecedes: KKJ99058
9 Piece 1/2" Drive 6 Point Extra Thin Wall Wheel Protector Socket Set
Features and Benefits
  • Durable outer sleeve and insert protects high polished wheels and lug nuts from damage
  • Chrome-molybdenum alloy steel for long life
  • Heavy duty blow molded case
  • Fully Guaranteed
Set includes: SAE sizes 3/4" (light green), 13/16" (purple), 7/8" (green), 15/16" (brown), 1" (silver), 1-1/16" (black) and Metric sizes 17mm (blue), 19mm (yellow) and 21mm (red).
Kiene Wheel Wiz Hub-Piloted Wheel Puller - With Drive Axle Socket (WW2151)

The Kiene Wheel Whiz is the proven successful way to remove seized hub-piloted wheels.

The Kiene Wheel Whiz is the original hub-piloted wheel puller used for transit buses and other heavy-duty fleet applications.

  • The Wheel Whiz quickly and safely removes seized hub-piloted wheels from steering, drive and trailer axles.
  • The Wheel Whiz uses five pulling chains to remove even the most stubborn wheels safely and allow the vehicle to be returned to service quickly.
  • The Wheel Whiz works effectively on steel or aluminum wheels.
Pulling Chain Options
  • WW2101: Steel wheels with 4" and large hand holes
  • WW2102: Aluminum wheels with 1-5/8" holes
  • WW2104: Wheels with 1-1/2" holes
  • WW2105: Supersingles
  • WW2107: Ford 350 & UPS package cars
  • WW2108: Steel wheel with 2.9" diameter holes
  • WW2109: Two hole wheels with valve stem interference
Hub Socket Options
  • WW2151: Drive Axle Socket - Fits most Eaton & Meritor(Rockwell) drive axles
  • WW2152: Mini-Bus Socket - Fits most smaller hub caps on some buses
  • WW2153: Bus Steering Axle & Euclid Trailer Socket - CR1798, Stemco 343-4176 & 343-4080 and Euclid hub caps
  • WW2154: Trailer Socket - Fits most Stemco hub caps and CR1643 & CR1743
  • WW2155: Freuhauf Trailer Socket
  • WW2156: Pro Par Trailer Socket: Fits Pro Par hub caps
Dayton & Dual Wheel Adapter for Big Truck Tire Step - (Adapter Bar Only)

The 5950 Dual Wheel Adapter must be used when using the Big Truck Tire Step on Dayton and dual wheels.

This adapter provides extra stability by resting against the tire when there is no rim to rest against. The Dual Wheel Adapter is included with the 5800 Super Single 2-Step and the 5300 Super Single 3-Step.

The Dual Wheel Adapter can be easily attached to any Big Truck Tire Step by sliding the adapter’s two attachment posts over the step’s rear stabilizing posts. Secure the adapter with the included screws and nuts.

Super Single Model numbers 5800 and 5300 come pre-drilled for the adapter. If using the dual wheel adapter with model numbers 5500 or 5100 you must: 1) Remove vinyl caps. 2) Slide on adapter and mark hole placement. 3) Drill holes in the stabilizing posts. 4) Attach Dual Wheel Adapter.

*Note: This is the adapter bar only. Steps are sold separately.

Minimizer Floor Mats Freightliner M2-106/112/108SD/114SD w/Bench Seat

Please See Coverages Tab for Exact Models and Years for fit

Whether it’s the mud and snow off your booths or your morning coffee, the latest innovation from Minimizer is designed to protect the floor of your truck for years to come.

The engineers at Minimizer use cutting edge technology to scan the interior measurements and angles of each specific make and model semi cab to ensure an exact fit. A retention hook mounted to the base of the stick shift is designed to keep your floor mat in place.

  • Our tray system was designed to be removed easily for quick cleaning. In a matter of seconds you can have your Floor Mats looking new and reinstalled so you can get your truck back on the road.
  • The textured surface will ensure your boots always get a solid grip. They will not break or crack under extreme conditions and are backed by a Lifetime Manufacturers Warranty.
  • Made out of a proprietary thermoplastic, the Floor Mats are designed to hold up to the daily abuse of the heavy duty trucking industry.
Loading...