Are you looking for:

Wheel Guard, 10 Hole, 285.75mm B.C., Hub-Piloted, 22mm Studs, Unimount
Prevents rust, scale, corrosion, and galvanic electrolysis on disc wheels. Nylon separator plate, placed between the hub or drum and the wheel, and/or between two wheels on dual applications. The wheel-guard is highly recommended in severe applications where corrosion and/or wear has been identified as a problem. Both aluminum and steel wheels can benefit from wheel-guard.
Kiene: Engine Mounting Adapter for Detroit Diesel 71 Series, 92 Series

Engine adapter for Detroit Diesel 71 Series 6V & 8V, 92 Series 6V & 8V Engines.


A large assortment of engine mounting plates are available for mounting various makes and models of engines as well as transmissions to the KIENE engine rebuild stand. They provide simple attachment to the engine using mounting pads and holes provided by the engine manufacturer, thus emilinating, where possible, removal of accessory equipment from the engine.

Buyers 6 Inch Red Oval Stop/Turn/Tail Light with 10 LEDS (AMP Connection)
  • Sold in quantities of 10.
  • PL-3 model also available in individual kits that include a plug and grommet for installation.
  • Backed with a limited lifetime warranty.

Buyers Products 6 Inch Oval Stop/Turn/Tail Light with 10 LEDs is used on trucks and trailers to meet FMVSS/CMVSS 108 regulations.

The light has a red lens and is available with a PL-3 or AMP-style connection.

Lights are sold in quantities of 10. The PL-3 model is also available in individual kits that includes a plug and grommet for installation. Lights are backed with a limited lifetime warranty.

Martins Industries MW-64HP Flatematic High Pressure Auto Tire Inflator
  • Inflate your high-pressure tires automatically up to 232 psi while keeping your hands free.
  • Wall-mounted unit with 25’ air hose to easily reach all tires on the vehicle.
  • Only 2 min. 20 sec. to inflate a 11R22.5 tire from 0 to 100 psi.
  • Loud audible signal warns you that the tire has reached the desired pressure.
  • 4 measurement units (psi, bar, kPa, kg/cm2), nitrogen purge cycles, LCD screen & backlight.

Designed for high-pressure tires the Flatematic High pressure automatic tire inflator can precisely inflate up to 232 psi. This one outlet automatic tire inflator once connected to the tire will automatically start inflation or deflation. Its clip-on chuck secures and makes tire inflation more productive by allowing you to work away from the tire.

The Flatematic High pressure is also nitrogen compatible and is equipped with a N2 purge cycle function which can perform up to 9 cycles. Each cycle will inflate with nitrogen up to the selected pressure then deflate to 5 psi then inflate again to the final selected pressure. For every purge cycle performed, the nitrogen purity in the tire increases.

*Air compressor required

Buyers .75 Inch Round Marker Clearance Lights - 1 LED Amber With Male Bullets
  • Wiring options include leads with blunt cut ends or .180 in. male bullet connector.
  • PC rated to produce light at a 90° angle left and right of center.
  • Mounting grommet is included.
  • Backed with a limited lifetime warranty.

Buyers Products 0.75 Inch Round Marker Clearance Lights with 1 LED are used on trucks and trailers to meet FMVSS/CMVSS 108 regulations.

The round marker lights have a single LED and are PC rated to produce a 90° angle left and right of center when properly mounted.

Lights are available in red, clear, or amber with smooth or faceted lenses. They mount with either blunt cut leads or .180 in. male bullet connectors. The clear lights cannot be used as a marker light.

Lights are sold in bulk and backed with a limited lifetime warranty.

Product Common Use: Trailers, Service Vehicles, Dump Trucks, Work Trucks

Loading...