Are you looking for:

JET JHJ-22-1/2L 22-1/2 Ton Low Profile Hydraulic Bottle Jack (2 Piece)

Features and Benefits:

  • For lifting, pushing, spreading, bending, pressing or straightening requirements
  • Not affected by temperature extremes
  • Electrically welded base and cylinders to assure strength and eliminate leaks
  • Pump handle included

Electrically welded base and cylinders to assure strength and eliminate leaks. Works in upright, angled or horizontal position. Complies ANSI/ASME B30-1 and PALD-1 standards.

GoLight 30214ST Stryker LED Permanent Mount w/Dash-Mount Remote - Black

GoLight Stryker LED Searchlight with Hard-Wired Dash-Mount Remote


  • LED technology
  • Remote controlled operation
  • Three different remote options
  • 370 degree rotation x 135 degree tilt
  • Stainless steel mounting plate system
  • Integrated 12V DC high-torque motors
  • Weatherproof for land and sea applications
  • U.V. Ray and salt water resistant
  • 2.8 Amps with 12V power source
  • 5-year limited warranty
  • Magnetic base now available
  • AutoEnginuity Enhanced Interface for Chrysler and Dodge-Family (EI04)

    The enhanced Chrysler interface supports hundreds of sensors selected from the powertrain, body, chassis, and transmission system. It includes hi- and low-speed sensor support giving you more sensors and faster throughput then our competitors. This enhanced interface comes with its own hardware interface specifically designed for Chrysler SCI and CCD based controllers. By doing a stand-alone interface we can offer you more SCI coverage then our competitors who are limited by electrical issues with generic OBD-II. Also supported is the CR2 and CR3 Sprinter ('04 - '06), Jeep Liberty Diesel ('05 - '06), diesel Cummins engines, and the Venom equipped Vipers ('08+).

    SBEC/JTEC System Tests:

  • EGR System Test
  • EVAP System Monitor Service Test
  • Erase All DTC Fault Codes
  • Generate Full Field Test
  • Gov & 3-4 Shift Valve Test - JTEC Only
  • Leak Detect Pump Test
  • Purge Vapors Test
  • Reset All Adaptive Memory Fuel Cells
  • Reset All Non-Volatile Memory
  • Reset CAM/Crank Misalignment
  • Reset CAM, Crank, and Sync Status Record
  • Reset Duty Cycle Monitor
  • Reset Engine Running Time Record
  • Reset Fuel Shut-off Record
  • Reset Intake Airflow Control Stepper Motor Position
  • Reset Trip Information
  • Set Sync Signal - JTEC Only
  • Set Minimum Throttle Position to Maximum
  • Torque Converter Clutch Test - JTEC Only

  • VPW-based System Tests:

  • ABS Bleed Brakes (EBC325, Mk20e, and Mk25e)
  • Tire Size Programming
  • Transmission Rear/Front Wheel Brake Torque Test
  • Transmission Pump Test
  • Transmission Quick Learn
  • Transmission TCC Break-In Test
  • Transmission Front Wheel Pinion Factor

  • NGC System Tests:

  • Injector Kill Test
  • NVLD Force Monitor Test
  • Purge Vapor Tests
  • Reset all On-Board Control Units
  • Report Part Number
  • Report Reflash Program Counter

  • CAN-based Module System Test and Configuration Support:

  • ABS Brake Bleed
  • ABS Initialize ECU
  • Auto Door Locks
  • Beltminder
  • Cylinder Performance Test
  • Current VIN Programming
  • CAM and Crank Relearn
  • DRL Setup Configuration
  • EATX Quick Learn
  • Engine On Odometer
  • IMA Programming Injestors
  • Injector Quantity Adjustment
  • Module Configuration Setup
  • Retrieve Installed Module VINs
  • Tire Pressure Sensor ID Programming
  • Tire Pressure Trigger Configuration
  • Tire Pressure Pressure Calibration
  • Tire Size Programming
  • Minimizer Floor Mats - Peterbilt 357/377/378/379/385 (prior to 5/2004)

    Please See Coverages Tab for Exact Models and Years for fit

    Whether it’s the mud and snow off your booths or your morning coffee, the latest innovation from Minimizer is designed to protect the floor of your truck for years to come.

    The engineers at Minimizer use cutting edge technology to scan the interior measurements and angles of each specific make and model semi cab to ensure an exact fit. A retention hook mounted to the base of the stick shift is designed to keep your floor mat in place.

    • Our tray system was designed to be removed easily for quick cleaning. In a matter of seconds you can have your Peterbilt Floor Mats looking new and reinstalled so you can get your truck back on the road.
    • The textured surface will ensure your boots always get a solid grip. They will not break or crack under extreme conditions and are backed by a Lifetime Manufacturers Warranty.
    • Made out of a proprietary thermoplastic, the Peterbilt Floor Mats are designed to hold up to the daily abuse of the heavy duty trucking industry.
    Schumacher ProSeries 12V Lithium Ion Jump Starter w/USB 2000 Peak Amp
    • HEAVY-DUTY PERFORMANCE FOR JUMP STARTING AND CHARGING USB DEVICES
    • 2 Lithium Iron Phosphate batteries
    • Scrolling digital display
    • Charging LED indicator
    • Push button controls
    • Dual 2.1A USB ports
    • 12V DC output port
    • Reverse connection alarm and warning
    • 4-gauge, 20” cables
    • 12V 3-pin socket for recharging
    • 2A external automatic charger
    • Rust and corrosion-proof case
    • Professional clamps with ergonomic grips
    • Schu Eco Energy ─ meets the highest industry standards
    • DOE compliant
    • Contents: (1) DSR128 jump starter (1) 100~120V AC charger (1) 12V DC car charger (1) 12V port adaptor (1) manual

    Specs:

    • Output Voltage: 12V DC
    • Output Current (Peak): 2000A
    • Dimensions: 11.81 × 5.62 × 14.96 in
    • Weight: 9.687 lb
    • Warranty Period: 1 year
    Loading...