Are you looking for:

Scorpion Jack TJ12 Stationary 25,000 lb. capacity Truck Jack

The Scorpion Installed In-Ground lift is semi-recessed in your shop floor. This is a semi-inground installation is an ideal solution for those shops that perform a lot of tire service and Brake Service. This is an installed version of the ScorpionTJ12 service jack and it offers a perfect combination of speed, efficiency, ease of use and value. The Scorpion Installed lifts are much less expensive than your standard above- ground options or for that matter the in-ground options too.


These jacks are designed to lift the vehicle across the axle using the lifting saddles provided (Low/Med/Hi). So you lift the whole front end or axle assembly in one go. There is a tire spotting dish for quick set up, and a remote control to allow the operator to check the load.


There is a built in lock for safety and other convenience features.


The lifts come with a control station housing the pump unit and a 20 Ft. Remote control so the operator can spot the load.


Features:

  • 25,000 Lb capacity
  • Dual hydraulic rams for lifting
  • Lift over 20" with a built in safety lock
  • Lift across the axle with the lifting saddles or lift on the frame
  • Heavy-duty hydraulics and air motor

  • Choose between:

  • Above Ground install - 8" Driver Over Height
  • Semi In-Ground install - 4.25" Drive Over Height
  • In-Ground Install - Flush mount with 0" Driver Over Height
  • Diamond Tread Aluminum Topsider Truck Box Series - 16" x 13" x 72"
  • Large 12" tall door opening and the recessed door frame provide easy access to spacious storage area
  • Full-length continuous hinge on doors offers a sturdy, durable and smooth performance
  • Heavy-duty steel support legs mount directly into bed floor, not into fender
  • Contractor grade diamond bright tread aluminum box
  • Thick 3" wide rubber pad protects truck side rail
  • No drilling in side rail; J-bolts fasten under bed lip
  • Stainless steel die cast T-handle compression latch with lock for security
  • Full-weather stripping keeps moisture and dust out
  • Individually boxed for shipping
  • Two doors

  • Buyers # 1701551

    H x D x W Size: 16" x 13" x 72"

    Emerson: Model 110 Air jack/Safety Stand 30,000 lb Capacity (Pair)

    Speed of lifting combined with safety by using safety pins to raise the extensions to the lifting point, while a second safety pin is used to lock the main ram into position once the lifting action has been completed. This feature converts the jack into a safety stand. Four safety positions save valuable time and promotes operator safety.

    Polyurethane is bonded to the lifting saddles for non-slip surface.

    Patented, beveled piston and guide allows the ram to follow the arc of the load without binding. This feature allows smooth lifting and lowering of the load.

    Quick snap detachable handles can be removed in tight working spaces, or for safety purposes.


    Specs:

  • Lowest Height (w/o extension): 15-3/4"
  • High Height (w/extensions): 52"
  • Long extension (adjustable): 24"
  • Short extension: 8"
  • Ram travel: 12"
  • Safety pin positions: 4
  • Base diameter: 11-1/2"
  • Capacity (single): 15,000 lbs
  • Capacity (Pair): 30,000 lbs

  • The rate lifting capacity for a pair of Model 110s is 30,000 lbs with 200 PSI at the air source. Below are the lifting capacities at various air pressures.


  • 100psi: 15,000 lbs
  • 120psi: 18,000 lbs
  • 140psi: 21,000 lbs
  • 160psi: 24,000 lbs
  • 180psi: 27,000 lbs
  • 200psi: 30,000 lbs
  • Robinair 34988NI Premium A/C Recover, Recycle, Recharge Machine

    The new Robinair 34988NI Premium A/C Machine combines ease of use and superior accuracy. It recovers, recycles, evacuates, leak tests and recharges R-134a vehicle systems quickly and accurately. The fully automatic function will recover, vacuum, leak test and charge on its own without the need to stand and monitor the machine. The product is fully SAE J2788 compliant and exceeds the requirements for charge accuracy and recovery efficiency. Robinair's patented automatic refrigerant refill feature maintains a user-selectable amount of refrigerant in the internal vessel and signals when it’s time to change supply tank, no monitoring required. The 34988NI will automatically add oil if necessary using load cells that measure the amount of oil removed from the system and automatically putting the right amount of A/C lubricant back into the system, make the 34988NI the only true fully automatic machine available today.

    The new 34988NI now comes with two separate oil inject bottles so two different types of oil can be stored and injected making it easy and convenient as technicians service different vehicles. A large, easy-to-read color display and a printer are standard upgrades on the new 34988NI. It also has the capability to inject UV dye into the vehicle's A/C system for leak detection and making any future maintenance easier. An optional refrigerant charge and oil capacities database is available for North American market vehicles which saves time from having to look up unknown charge amounts.

    Specs:

    • Operating Temperature: 32° - 120°F (0°-50°C)
    • Storage Temperature: 0 to 150°F (-18 to 66°C)
    • Recovery Performance: >95% at 70 to 75° F (21 to 24°C) <30 minutes
    • Charge Performance: +/- 0.5 oz at 70° to 75° F (+/- 15g at 21° to 24° C)
    • Compressor: 3/8 hp, pressure protected, oiled, hermetically sealed
    • Vacuum Pump: 1.5 cfm dual stage, 29.9 InHg
    • Hoses: 9 ft (2.75 m)
    • Filter Capacity: 150 lb (75kg), spin-on type
    • Internal cylinder: 30 lb. DOT
    • Operating voltage: 125 VAC 60 Hz
    • Display: 7 in. LCD graphical display
    • Languages: English, French, Spanish, Portuguese
    • Certifications: SAE J2788
    • Refrigerant compatibility: R-134a

    Includes:

    • 34988NI ACS machine
    • Operators manual
    • Authorized Service Center sheet
    • MACS 609 Certification sheet
    • MVAC Equipment Certification sheet
    • Calibration weight

    Features:

    • Fully automatic operation frees technican to perform other tasks while servicing the vehicle's A/C system
    • Automatic oil drain and inject feature enables the machine to measure amount of oil removed from the vehicle and automatically puts the same amount back in free the user from measuring the amount of oil removed
    • Multiple oil bottles gives the machine the flexibility to store and inject two different types of oil saving the user time when servicing multiple vehicles
    • Large, easy-to-read graphical display
    • Standard onboard printer gives the user the ability to print service data to present to a customer after service
    • Unique Automatic Refrigerant Refill maintains a user-selectable amount of refrigerant in an internal vessel and signals when it’s time to change supply tank, no monitoring required
    • Programmable vacuum feature defaults to 15 mins, but allows the user to select desired vacuum time up to 99 minutes
    • Automatic Air Purge eliminates system-damaging air without monitoring gauges or opening valves
    • Save before and after service data allows the user to store before and after service information by vehicle
    • Visual and audible alarm notifies the user when service is complete, or if a problem has occurred
    • Automatic Dye Inject gives the user the ability to use the machine to inject UV dye into a vehicle’s A/C system
    • Optional refrigerant and oil database includes A/C charge and oil capacities for North American market vehicles
    Tiger Tool Leaf Spring & Shackle Pin Socket Kenworth (Large)

    Remove and install even the most stubborn threaded leaf spring and shackle pins on International, Peterbilt, and Kenworth suspensions. Refer to dimensions to ensure compatibility.


  • Manufactured from high-grade steel to prevent the socket from slipping or spinning under extreme loads
  • Black oxidize finish for extended durability
  • 1/2" Drive
  • Loading...