The 5950 Dual Wheel Adapter must be used when using the Big Truck Tire Step on Dayton and dual wheels.
This adapter provides extra stability by resting against the tire when there is no rim to rest against. The Dual Wheel Adapter is included with the 5800 Super Single 2-Step and the 5300 Super Single 3-Step.
The Dual Wheel Adapter can be easily attached to any Big Truck Tire Step by sliding the adapter’s two attachment posts over the step’s rear stabilizing posts. Secure the adapter with the included screws and nuts.
Super Single Model numbers 5800 and 5300 come pre-drilled for the adapter. If using the dual wheel adapter with model numbers 5500 or 5100 you must: 1) Remove vinyl caps. 2) Slide on adapter and mark hole placement. 3) Drill holes in the stabilizing posts. 4) Attach Dual Wheel Adapter.
*Note: This is the adapter bar only. Steps are sold separately.
Includes: both long and short extentions, polyurethane bonded saddle & 2 safety pins
Features:
Specs:
Speed of lifting combined with safety by using safety pins to raise the extensions to the lifting point, while a second safety pin is used to lock the main ram into position once the lifting action has been completed. This feature converts the jack into a safety stand. Four safety positions save valuable time and promotes operator safety.
Polyurethane is bonded to the lifting saddles for non-slip surface.
Patented, beveled piston and guide allows the ram to follow the arc of the load without binding. This feature allows smooth lifting and lowering of the load.
Quick snap detachable handles can be removed in tight working spaces, or for safety purposes.
Specs:
The rate lifting capacity for a pair of Model 110s is 30,000 lbs with 200 PSI at the air source. Below are the lifting capacities at various air pressures.