Are you looking for:

Quick Changer Oil Drain Plug - 22mm - 1.5 (Short Thread)

Changing your oil can be a messy, time-consuming task. Waiting for the engine to cool wastes valuable shop time. Spilled hot oil makes a mess and, it can burn!

Now convert every vehicle into a Quick-Changer vehicle.

Now you can eliminate these hassles by replacing your standard oil drain plugs with the innovative Quick Changer oil-drain system. It takes only a few minutes, with no special tools required.

Once you've installed the Quick Changer oil drain valve, you can quickly and easily drain the oil at any time, even when the engine is hot. Actually, draining the oil at high temperatures results in a cleaner flush, since the larger dirt particles drain out with the oil.

No more stripped-out oil pans.

Just connect the drain hose to the Quick-Changer valve, which opens automatically. When finished, disconnect the hose. The valve shuts automatically and cleanly. No more mess. No more spilled oil.

Best of all, by eliminating conventional drain plugs, the Quick Changer system prevents oil-pan threads from being stripped. Your oil pans last longer, saving you money. The valve doesn't extend beyond the threaded portion of the drain.

Just look at these Quick-Changer advantages:

  • Eliminates stripped threads and frozen drain plugs
  • Is fully leak-proof unique design prevents accidental valve openings
  • Draws oil samples quickly and easily, with full control over oil flow
  • Valve and drain assembly fabricated in corrosion-resistant brass
  • Available in metric and U.S. sizes to fit all engines
  • Safe, clean, environmentally friendly operation
  • Meets rigorous independent test lab standards
  • Drains oil faster than conventional drain plugs
Vslue Series 40:1 Single Acting Grease Pump for 25-50 lb. Pail

Features and Benefits:

  • Professional quality lubrication at an affordable price
  • High pressure
  • Portable medium to light duty chassis lubrication
  • Proven valved piston design
  • Simple grease plunger/bushing

Easy, one handed operation. Built for durability and reliability. Includes: 40:1 series pump, pail cover, handle, high-pressure control valve, universal swivel, coupler, 7' connecting hose, and follower plate. Pail not included.

Single Stage Electric Reciprocating Air Compressor 3.5 HP

Features and Benefits:

  • 3.5 hp 60gal reciprocating air compressor
  • 130 max PSI
  • This single phase motor is 208-230 volt with a 1.15 service factor
  • Fully tested and shipped with oil, ready to go to work for you!
Automatic Indoor/Outdoor Tire Inflator System (XDA)

For precise and consistent tire inflation Haltecs Automatic Tire Inflator is the most advanced tire inflation equipment available today. Safe, reliable and accurate, it is also incredibly easy to use simply set the desired PSI umber on the inflator, connect the hose to the tires valve and thats it, Haltecs Automatic Tire Inflator does the rest. The built-in computer constantly checks the accuracy of the gauge, so theyre virtually maintenance free.
Features:
" Safe and easy to operate
" Inflates or deflates to desired pressure
" Extremely accurate extends tire life
" Faster operation than conventional gauges
" Detachable twelve-foot hose kit with clip on air chuck
" Large, easy to read back-lit digital read out
" Nitrogen capable
" Pressure range of 5-145 PSI
" Power-up pressure of 30 PSI
" Accuracy .3 PSI

Safety Precaution
These products, as well as all tire tools, should never be used by persons unless they have been trained properly according to O.S.H.A. Regulation #29CFR 1910.177 entitled Servicing Single-Piece & Multi-Piece Rim Wheels.

PROBLEM:
10% Under-inflation = 4% loss of fuel*
10% Over-inflation = 10% loss of treadwear*
SOLUTION:
HALTEC AUTOMATIC TIRE INFLATOR SYSTEMS
*Fuel and tread wear estimates are based upon EPA and Goodyear studies.

Kiene Pulling Chain For Wheel Grabber - Individual

Replacement Chain for Wheel Grabber. Chains are sold individually.

Chain Types & Usage:

  • Part # WW2101 - Steel wheels with 4" and larger hand holes.
  • Part # WW2102 - Aluminum wheels with 1-5/8" to 2-1/4" holes
  • Part # WW2107 - Ford 350 & UPS package cars
  • Part # WW2108 - Steel wheels with 2.9" diameter holes

About the Wheel Grabber

Galvanic electrolysis can literally freeze hub piloted wheels on their hub. In fact they can become so frozen to their hub that it can become a serious safety problem trying to remove them. Do any of the following techniques sound familiar: Swinging a 20 lb. sledge at the tire (hope your arms and back hold out); Placing a porta power between the frame and wheel (stand back); Loosening the lug nuts and driving the vehicle around the block (and hope the wheels don't fall off before you get back to the garage). It sounds strange, but unfortunately these are some of actual techniques that have been used.

  • Works effectively on steel or aluminum wheels, drive axle, steer axle, or trailer.
  • Great for mobile service work.

The Pulling Chains are hooked into the hand holes and their Safety Hooks are attached to the Wheel Grabber. Next, the Hub Socket is centered on the wheel hub. An impact wrench, applied to the Forcing Screw, uniformly tightens the Pulling Chains until the seized wheel is freed - without damage to the wheel or hub! SAFE, QUICK, SIMPLE!

Loading...