Are you looking for:

Tow Strap With Looped Ends 3" X 20' - 30,000 lb. Capacity

Features and Benefits:

  • Heavy duty nylon web construction with reinforced stitching and looped ends
  • Maximum load capacity: 30,000 lbs.
  • For personal safety, recommended working load should not exceed one-third of the maximum rate load
     

 

Two Stage Engine-Powered Reciprocating Air Compressor 12HP

Features and Benefits:

  • T39 pump has a solid cast iron cylinder
  • 12 HP Kohler Engine
  • 12 volt electric and recoil start
  • 25.25 ACFM at 100 PSI
  • Battery Charging system
  • 100% factory tested at full pressure
  • Shipped "wet" ready for use
  • Dimensions: 44-1/2 in. L x 19 in. W x 45 in. H

  Two year "Bumper To Bumper" Warranty!

1000 Pound 2-Stage Telescoping Hydraulic Transmission Jack

Features and Benefits

  • 2 Stage chrome plated rams maximize its high reach operated by a user friendly foot pedal
  • Extra-wide base lowers center of gravity and promotes stability
  • Rugged steel wheels and full swivel ball bearing casters
  • Adjustable ratchet style saddle quickly adjusts to almost any pan configuration
  • Minimum height: 37-7/8"; maximum height: 77-5/8"; weight: 180 lbs.

A unique release pedal provides safety in lowering the load. Channel iron legs provide a solid base.

Economical Low Profile Air Control Unit Regulator/Filter

AC4525

Economical Low profile Air Control Unit

Features and Benefits:
  • A compact, high flow regulator / filter for point of use air control
  • _ in. 100 CFM
  • Site glass
  • T-handle with manual drain
  • Designed for every Ail line drop in the shop
Express Mobile - Light and Air Brake System Tester

Make your service truck investment as productive as possible with an Express Mobile and eliminate most of the walking associated with trailer servicing. you can easily check all lighting functions and the air brake system (including brake adjustment) in just two minutes, start to finish. That's 20 trailers per hour including set-up, disconnect and all walk-time!


  • Designed to be mounted in your service truck. Perfect for on-site trailer readiness inspection
  • Radio remote-controlled air brake tester saves tons of time.
  • Built in Scanner lighting tester operates lights in sequence. Check them all in a single walk around
  • Test airbrake and lighting functions in minutes
  • Integral mounting flanges make installation a snap!
  • Sourced by your service truck's electrical and service air systems
  • User supplied air hoses and trailer cable
  • Includes spare remote
    General Specifications
    Scope of Equipment Trailer lighting systems testing using a circuit scanning sequence with trailer air brake testing using radio remote-controlled air actuation from behind the trailer. Unit is designed for mounting in a service truck.
    Model Designation 01011
    Dimensions 14.88"H x 16.18"W x 5.38"D overall, including mounting flanges
    Cabinet 16-gauge steel, base pan 14-gauge. Weldment forms basic structure. Black winkle finish.
    Mounting Integral mounting flanges on the back and bottom of the cabinet for mounting to floor or interior sidewall of service truck.
    Environmental Weather, dust, oil, overspray, and dirt resistant. Not intended to be mounted outside of the service body
    Light / Electrical Testing Equipment
    Light Testing Equipment Complete built-in Scanner trailer light tester as described below
    Operating Voltage 12 vdc (nominal)
    Wiring Protocol SAE 7-Wire
    Scanned Circuits Left turn (1.5 sec), stop (3.0 sec), right turn (1.5 sec). Circuits are powered one at a time, and the sequence repeats indefinitely
    Freeze feature "Mode Select" switch starts and stop scanning action as needed. Has center "all off" position
    Switched Circuits "On-Off Toggle" switches control aux, marker, and tail light circuits
    Circuit Status Indicator One red LED for each of the six circuits
    Low Battery Indicator One red LED blinks at 11 volts, on steady at 10 volts
    Circuit Breakers Aux, mark, tail - one 20 amp auto-reset circuit breaker. Left, stop, right - one 15 amp auto-reset circuit breaker
    Short Circuit Warning One LED for 20 amp breake, one LED for the 15 amp breaker
    Current Capacity 34 amps total
    Trailer Connection SAE 7-Pole socket mounted on cabinet. Light cord and plugs not provided. these vary with the specifics of each installation
    Power Supply 12 vdc provided by service truck. Requires connection to truck battery's positive terminal, a good ground connection, and connection to the truck's accessory feed (the latter is not a strict requirement but is strongly recommended)
  • Loading...