Are you looking for:

Automatic Transmission And Engine Oil Pressure Tester With Two Gauges
Features and Benefits:
  • Check oil pressure in automatic transmissions and engines
  • Adapters provide coverage of most domestic and imported cars and light trucks including late models
  • Supplied with two gauges calibrated as follows:
  • Large Gauge: 0-600PSI, 0-4,000 kPa, 0-40 Bar
  • Small Gauge: 0-50PSI, 0-3.5 Bar
Large gauge can be used for all applications and has a hang- up hook. Use small gauge for more accurate reading of engine oil pressure where maximum oil pressure does not exceed 50 RS.I. (3.5 BAR). Includes 6 feet of oil proof hose and 10 assorted fittings. Supplied in durable vinyl pouch for store display and tool box storage. Full instructions provided. Now includes an adapter with two grooves, Cat. No. 34573, for use on most Asian and some American and European vehicles. Thread size is 8MM-1.00 Male x 1/8" NPT Female.
Kiene Wheel Wiz Hub-Piloted Wheel Puller - With Drive Axle Socket (WW2151)

The Kiene Wheel Whiz is the proven successful way to remove seized hub-piloted wheels.

The Kiene Wheel Whiz is the original hub-piloted wheel puller used for transit buses and other heavy-duty fleet applications.

  • The Wheel Whiz quickly and safely removes seized hub-piloted wheels from steering, drive and trailer axles.
  • The Wheel Whiz uses five pulling chains to remove even the most stubborn wheels safely and allow the vehicle to be returned to service quickly.
  • The Wheel Whiz works effectively on steel or aluminum wheels.
Pulling Chain Options
  • WW2101: Steel wheels with 4" and large hand holes
  • WW2102: Aluminum wheels with 1-5/8" holes
  • WW2104: Wheels with 1-1/2" holes
  • WW2105: Supersingles
  • WW2107: Ford 350 & UPS package cars
  • WW2108: Steel wheel with 2.9" diameter holes
  • WW2109: Two hole wheels with valve stem interference
Hub Socket Options
  • WW2151: Drive Axle Socket - Fits most Eaton & Meritor(Rockwell) drive axles
  • WW2152: Mini-Bus Socket - Fits most smaller hub caps on some buses
  • WW2153: Bus Steering Axle & Euclid Trailer Socket - CR1798, Stemco 343-4176 & 343-4080 and Euclid hub caps
  • WW2154: Trailer Socket - Fits most Stemco hub caps and CR1643 & CR1743
  • WW2155: Freuhauf Trailer Socket
  • WW2156: Pro Par Trailer Socket: Fits Pro Par hub caps
Dayton & Dual Wheel Adapter for Big Truck Tire Step - (Adapter Bar Only)

The 5950 Dual Wheel Adapter must be used when using the Big Truck Tire Step on Dayton and dual wheels.

This adapter provides extra stability by resting against the tire when there is no rim to rest against. The Dual Wheel Adapter is included with the 5800 Super Single 2-Step and the 5300 Super Single 3-Step.

The Dual Wheel Adapter can be easily attached to any Big Truck Tire Step by sliding the adapter’s two attachment posts over the step’s rear stabilizing posts. Secure the adapter with the included screws and nuts.

Super Single Model numbers 5800 and 5300 come pre-drilled for the adapter. If using the dual wheel adapter with model numbers 5500 or 5100 you must: 1) Remove vinyl caps. 2) Slide on adapter and mark hole placement. 3) Drill holes in the stabilizing posts. 4) Attach Dual Wheel Adapter.

*Note: This is the adapter bar only. Steps are sold separately.

EcoMaster 150 150-Gallon Stainless Heated Agitating Lift Parts Washer
  • Heavy duty steel construction for long lasting durability
  • Self-cleaning agitating platform lifts parts to top for easy loading and unloading
  • Filter regulator with auto drain
  • Adjustable agitation speed
  • Flow-through brush with polyester filaments for the toughest water-based cleaning applications
  • Durable, baked on powder coated epoxy finish
  • Not to be used with chlorinated solvents
  • Stainless steel spring-loaded door closures
  • Thermostat is preset to deliver optimal cleaning temperature of 110 degrees F
  • Includes backup thermostat (non-adjustable)
  • 6,000 Watt heater
  • Electrical plug not included
  • Stainless steel
  • Electrical plug not included
  • 12 Gauge construction
  • Platform dimensions: 28" W x 54" L
  • Overall Dimensions: 44-1/2" W x 64" L x 66-1/2" H
  • Inside Dimensions 37-1/2" W x 57" L x 37-1/2" H
  • Load Capacity: 750 lbs
  • JPRO Professional Heavy Duty Diagnostic Software (Annual Subscription)

    JPRO® Professional is the most comprehensive and powerful all makes, all models diagnostic tool available in the industry today. In one, easy annual subscription, JPRO provides a complete & unparalleled diagnostic service & repair solution with bi-directional functionality.

    Next Step Service Information module helps speed up repair times by providing users with detailed engine repair information and troubleshooting guides for ABS and Transmissions – with the click of a button.

    Includes:

  • JPRO Professional Diagnostic Software (Annual Subscription)
  • (Optional)NextStep™ Service Information (Annual Subscription)
  • Annual subscription includes technical support and version release updates that include new coverage, features and functionality

  • FEATURES

  • Includes Heavy-Duty Modules: Mack, Volvo, Cummins, Detroit Diesel, International & PACCAR
  • Includes Medium-Duty Modules: Ford, GM, Isuzu & Sprinter
  • Bi-Directional Controls – Perform parameter changes (Mack & Volvo), DPF Regens (Mack, Volvo, Cummins, Detroit Diesel, International & PACCAR) & bi-directional tests with proprietary data & faults
  • OE Level Fault Code Information – Display over 99% of Heavy-Duty & Medium-Duty fault codes with detailed OEM level component and trailer descriptions
  • Fault Management – Clears faults and diagnoses all vehicle components in a single, easy to use application
  • Vehicle Reporting – View and print log files, including: Vehicle Health, Trip Reports & LOV Reports
  • Store & Save Data – Record data log files for playback at a later time, even away from the truck
  • Total Vehicle Health Status – See the entire vehicle in one pass on one screen + Up-to-Date – Provides 99% coverage of all heavy-duty truck DTCs through 2016
  • Loading...