Are you looking for:

Wheel Guard, 10 Hole, 285.75mm B.C., Hub-Piloted, 22mm Studs, Unimount
Prevents rust, scale, corrosion, and galvanic electrolysis on disc wheels. Nylon separator plate, placed between the hub or drum and the wheel, and/or between two wheels on dual applications. The wheel-guard is highly recommended in severe applications where corrosion and/or wear has been identified as a problem. Both aluminum and steel wheels can benefit from wheel-guard.
Detailed Driver Vehicle Inspection Report (DVIR) - 2-Ply Carbonless (100 pcs)

2-ply inspection report, carbonless, book format, 5-1/2" x 8-1/2"


  • Helps satisfy DOT vehicle regulations 49 CFR 396.11 and 396.13
  • Detailed DVIR lists specific tractor and trailer parts to help simplify inspection; driver simply check off parts that need repair
  • Includes key regulations printed on inside front cover to remind of DOT-required procedures
  • Book format, 31 sets per book
  • Two plies
  • Carbonless
  • Measures 5-1/2" x 8-1/2"
  • Quantity of 100
  • IPA Super MUTT Mobile Universal Trailer Tester - Standard Edition 9008-SE

    Quickly troubleshoot lighting, air brake and ABS systems with the industry's leading trailer tester. This intuitive and durable design is ideal for both on and off-site commercial trailer testing and repairs.

    Electrical Testing (12/24 Volt Operation

    • Power lights: Manually, All-On, Auto Scan, or by Remote Control
    • Audible and visual alerts: cross, open, overloaded, and short circuit indication
    • Pulsar mode allows diagnostic repair
    • Advanced trailer wiring diagnostics
    • Amperage Readout and range (0-20 amps)
    • Cable testing
    • Ground failure detection: differentiates between wire and chassis ground

    ABS Testing

    • Access ABS blink codes
    • Test ABS fault blink codes via Auxiliary and Brake Circuit activation (i.e. Meritor/Wabco, Bendix TABS-6 and Haldex systems)

    Air Brake Testing

    • Performs leak down test on service and emergency lines
    • Remote control allows observation of slackers to measure and adjust pushrods
    • Real time, repetitive brake activation to find developing problems and verify leaking servo cans
    • Features an internal air regulator

    Remote Control

    • 12-button remote control tests all trailer electric circuitry and air brake actuation, 200+ ft. range
    • Sync multiple remotes to one unit

    Includes:

    • 12-Button Remote Control
    • 5' 7-Way Cable
    • 8' Glad Hand Hoses
    1000 lb. (1/2 Ton) Capacity Air/Hydraulic Telescopic Transmission Jack

    Features and Benefits:

    • Fully adjustable lifting saddle with four ratchet adjustment fingers that quickly adjust to the transmission pan configuration
    • Low lift height of 35” for easy transfer of transmission from jack to work bench. Maximum lift height of 75” accommodates all technicians
    • Foot activated pedal raises air cylinder's ram to maximum load in seconds. Manual pump second stage quickly raises lifting saddle to desired and precise work height
    • Convenient hand grip for pushing or pulling load when the load is in the lowered position
    • Heavy duty nylon locking strap with ratchet fingers for securing the load to the lifting saddle

    Four full swivel ball bearing mounted caster wheels for easy maneuverability. Front casters can be easily locked to prevent the jack from rolling if necessary.
    Required Air Pressure 100 PSI
    Low Height 35"
    Raised Height 75"
    Saddle Forward Tilt 37°
    Saddle Backward Tilt 26°
    Saddle Lateral Tilt 12° left and right
    Base 30-1/4" square
    Shipping Weight 145 lbs.

    Gear/Pulley Puller, 2 or 3 Jaw, 7" Opening Width, 5-1/2" Maximum Reach
    Gear/Pulley Puller, 2 or 3 Jaw, 7" Maximum Opening Width, 5-1/2" Maximum Reach
    Loading...