Are you looking for:

Automatic Transmission And Engine Oil Pressure Tester W/ Two Gages
Features and Benefits:
  • Check oil pressure in automatic transmissions and engines
  • Adapters provide coverage of most domestic and imported cars and light trucks including late models
  • Supplied with two gauges calibrated as follows:
  • Large Gauge: 0-600PSI, 0-4,000 kPa, 0-40 Bar
  • Small Gauge: 0-50PSI, 0-3.5 Bar
Large gauge can be used for all applications and has a hang- up hook. Use small gauge for more accurate reading of engine oil pressure where maximum oil pressure does not exceed 50 RS.I. (3.5 BAR). Includes 6 feet of oil proof hose and 10 assorted fittings. Supplied in a durable, plastic molded storage case with carrying handle. Case measures 11-1/4" x 7-1/2" x 3" and has ample space for additional adapters and parts. Full instructions provided. Now includes an adapter with two grooves, Cat. No. 34573, for use on most Asian and some American and European vehicles. Thread size is 8MM-1.00 Male x 1/8" NPT Female.

 

3/4" Drive Split Beam Click Wrench - 200-600 ft-lbs

Split-Beam Click Wrenches overcome many of the problems associated with micrometer-style clock wrenches in abusive environments. The wrench has few components, and all critical parts are welded together at assembly. There is no need to "work in" a C series torque wrench before using it the first time. Nor is it necessary to adjust to the lowest torque setting after use. Setting the tool requires only fingertip force since the adjustment mechanism is not under load.

  • Drive Size: 3/4"
  • Drive Type: Detachable Ratchet
  • Primary Units: lb.ft.
  • Capacity: 200-600
  • Increments: 10
  • Overall Length: 48-29/64"
  • Effective Length: 44-31/32"
  • Width: 2-3/8"
  • Head Height (without square): 1-1/4"
  • Weight: 11.76 lbs.
  • (w/plastic case): 14.18 lbs.
  • Finish: Nickel / Chrome
  • Square Drive Service Kit: R44AR-RK
  • Meets or Exceeds the following Specifications: GGG-W-686C, ANSI B107.14M
Goodall 20 ft. 4 Gauge, 450 Amp, Parrot Jaw (14-203)

Heavy-Duty 4-Gague 450 Amp

  • Twin extruded jacket
  • Cable remains flexible to -40 degree F
  • Replaceable jaws, all copper wire
  • 20 ft
  • Branick EF Tire Spreader for OTR, AG, and Super Singles
    The Model EF has helped define Branick over the years. It is synonymous with quality and endurance, and is truly built for generations. It is air-powered and was designed for passenger, bus, truck, even tractor tires, and is also perfect for super-singles. The tire can rotate 360 degrees for inspection, repair or buffing, and the floor mounted controls lift and spread the tire. On the EF, the spread arms pivot into the beads. Made in the U.S.A. at Branick's manufacturing facility in Fargo, ND!
    Over Inflator and High Volume Indoor/Outdoor System(XDZ)

    For precise and consistent tire inflation Haltecs Automatic Tire Inflator is the most advanced tire inflation equipment available today. Safe, reliable and accurate, it is also incredibly easy to use simply set the desired PSI umber on the inflator, connect the hose to the tires valve and thats it, Haltecs Automatic Tire Inflator does the rest. The built-in computer constantly checks the accuracy of the gauge, so theyre virtually maintenance free.
    Features:
    " Safe and easy to operate
    " Inflates or deflates to desired pressure
    " Extremely accurate extends tire life
    " Faster operation than conventional gauges
    " Detachable twelve-foot hose kit with clip on air chuck
    " Large, easy to read back-lit digital read out
    " Nitrogen capable
    " Pressure range of 5-145 PSI
    " Power-up pressure of 30 PSI
    " Accuracy .3 PSI

    INDOOR ONLY SYSTEM

    89MDA provides highly accurate, reliable tire inflation for indoor applications
    such as vehicle workshops, detailing bays, car rental outlets and service
    centers. The 89MDA features an impact-resistant polycarbonate enclosure
    and can be used for fixed or mobile operation.
    Inflates a single tire at a time.

    Safety Precaution
    These products, as well as all tire tools, should never be used by persons unless they have been trained properly according to O.S.H.A. Regulation #29CFR 1910.177 entitled Servicing Single-Piece & Multi-Piece Rim Wheels.

    PROBLEM:
    10% Under-inflation = 4% loss of fuel*
    10% Over-inflation = 10% loss of treadwear*
    SOLUTION:
    HALTEC AUTOMATIC TIRE INFLATOR SYSTEMS
    *Fuel and tread wear estimates are based upon EPA and Goodyear studies.

    Loading...