Are you looking for:

Scorpion Jacks PJ15 15,000 lb. Capacity Pit Service Jack

The Scorpion PJ15 Pit Jack is designed for use inj Heavy Truck Service pits or can be used on above ground alignment ramp systems (Hunter & Bee-Line)


This jack will fit virtually any pit application due to the compact design (onlyh 34" wide) and expandable to 42" wide.


These jacks are designed to lift the vehicle to lift the vehicles across the axle using the lifting saddles provided (Low/Med/Hi)


Features:

  • Built in lock for safety
  • 15,000 lb capacity
  • Dual Hydraulic rams for lifting
  • Lift over 20" with built in safety lock
  • Convenient pull handle, powder coat paint & zinc plated components
  • Lift across the axle with the lifting saddles or lift on the frame!
  • Heavy-Duty Hydraulics and air motor
  • Special roller bearing wheels allow for effortless rolling
  • AutoEnginuity European ScanTool Bundle (SP07)
    #SP07 - Includes:
    • ProLine Interface (ST06)
    • Enhanced Audi/VW Expansion
    • Enhanced BMW/MINI Expansion
    • Enhanced Mercedes Expansion
    • Enhanced Jaguar Expansion
    • Enhanced Land Rover Expansion
    • Enhanced Porsche Expansion
    AutoEnginuity ProLine Scan Tool Bundle (SP01)

    The software is a complete OBD-II implementation.

    • True Plug-n-Play USB 2.0 hardware. No device drivers required.
    • Bi-directional support. You have the ability to initiate system and component tests*
    • Powerful user-interface. Completely resizable, dockable, and configurable
    • Factory scan tool options available
    • Support for the new extended sensor list (233 sensors--supporting the SAE J1979 May 2007 additions)
    • Wide-band O2 sensor support1
    • View O2 sensor test results and zoom to "known good" presets
    • Translated into German, Spanish, and Hungarian. Not just the software, but professionally translated Quick Start and User Guides
    • Most importantlyALL FOUR OBD-II vehicle interfaces. This is a savings of hundreds of dollars over the competitors units

    What's Included:

    • AutoEnginuity's software
    • AutoEnginuity's OBD-II vehicle interface
    • USB 2.0 interface and cable
    • User Guide
    • Quick Installation Guide

    Pro-Line ScanTool Bundle #33201 - Includes:

    • USB ScanTool (ST05)
    • ProLine Interface (ST06)
    • Enhanced Ford Expansion
    • Enhanced GM (with CAN D) Expansion
    • Enhanced Chrysler (Full) Expansion
    • Enhanced Toyota Expansion
    • Enhanced Nissan Expansion
    • Enhanced Honda Expansion
    • Enhanced Mazda Expansion
    • Enhanced Hyundai/Kia Expansion
    • Enhanced Subaru Expansion
    • Enhanced Mitsubishi Expansion
    • Enhanced Isuzu Expansion

    What AutoEnginuity's ScanTool can do:

    • Read Stored and Pending P, U, B, C Trouble Codes (including 20,000+ manufacturer specific codes)
    • Read and clear Freeze Frame dataGrid, Graph and Gauge
    • Clear the Check Engine or Service Engine Soon indicator
    • View live vehicle sensors in a meter, graph, and gauge format
    • View oxygen sensor live data and test results
    • View all 11 Inspection/Maintenance systems and Mode 6 data.
    • Unlimited logging of live vehicle sensors in XML or CSV (1ms logging accuracy).
    • Playback your datalogs for offline analysis.
    • Run and query specific component and system tests. Support for generic and enhanced bi-directional tests.
    • Configure your sensors' ranges, scaling value, audible alert triggers, units, and sampling rate.
    • Savable configurations. Set up the interface to suit your preferences and save it so you never have to do it again.
    • Read the ECM ID, calibration, and calibration verification IDs from all reporting ECMs.
    • View generic and manufacturer enhanced data on the same tool
    • Configure the interface to suit your preferences

    Supports:

    • 1996 and newer passenger vehicles whether it be domestic, Asian, or European.
    • SAE interfaces: J1850 (PWM and VPM), ISO-9141-2, ISO-14230 [KWP2000], and CAN [11Bit and 29Bit]

    Having trouble finding an intermittent issue? Data logging can be done in two different formats: 1) XML for browsers; and 2) CSV for spreadsheets. With our proprietary logging methods you can log up to nine sensors with 1ms of accuracy. Whether you logged in XML or CSV, you have the ability to playback and view your logs offline.

    With AutoEnginuity's ScanTool you have the ability to view all 11 of the inspection/maintenance system tests. These system tests can also be used to determine if the work performed fixed the problem or whether the vehicle will pass your local OBD-II-based emissions tests. Should a system test fail, you can see individual component results (Mode 6) fully translated and the data results scaled per the manufacturer's own specifications. *

    *Support for this feature is vehicle dependant.

    Radiator Pressure Tester and Vacuum Type Cooling Kit with Adapter

    Features and Benefits:

    • Allows for easy testing for leakage in radiator system and quick change of coolant
    • Unit is suitable for domestic and import vehicles
    • Color coded radiator test caps make it easy to choose the suitable test cap for the job
    • Special design of vacuum purge and refill tool connection fits nearly all type of radiator opening

    Set Includes: Pressure testing pump with hose, quick coupler with pressure release, and gauge: test range 0-35 psi (0-2.5 bar); 1 piece Blue and 1 piece black radiator cap test adapters to test for original radiator cap leakage; 17 pieces test caps for testing cooling systems on most domestic and import vehicles; vacuum type cooling system purge and refill tool kit for quick change of coolant; universal adapter; temperature gauge and a blow molded case.

    Applications: Mercedes Benz, GM, Jeep, Peugeot, Subaru, Chrysler, Acura, Mitsubishi, Nissan, Mazda, Toyota, Infiniti, Geo, Suzuki, Isuzu, Honda, Lexus, Volvo, Saab, Citroen, Renault, Fiat, Alfa, Mini Cooper, VW, BMW, Ford, Opel, Porsche, Audi, etc.

    Portable Battery Booster Pac - 300 Cranking Amps 900 Peak Amps

    Features and Benefits:

    • 900 peak amps
    • LED battery status indicator
    • Automatic recharging
    • 21" Heavy-duty cables
    • DC outlet to power 12 Volt accessories
    • 1 year limited warranty
    • NOT compliant for California use, order SOLES2500C instead

    An ideal entry level 12V professional unit: features 900 peak amps, automatic charging, battery status LED’s and rotating holsters for easy clamp removal and replacement. Easy to use and lightweight, it is the ideal entry level professional jump starter. Its compact size, rugged case and ability to jump up to 5 vehicles on a single charge make the ES2500 a perfect companion for any situation in which you need portable power.

    Loading...