Are you looking for:

Hein-Werner High Reach Jack Stands - 10 Ton Capacity

Features and Benefits:

  • Heavy duty square tubing
  • Adjusts from 30" to 52" in 2" intervals
  • Large saddle securely supports load
  • Integrated wheels for easy positioning
  • Wide, square tubing construction and base for maximum load stability

Ideal for fleet, agricultural, and construction maintenance. Sold in pars. Base size: 19" x 19"; net weight: 144 lbs.

Diesel Compression Test Set With Tester and Adapters

Features and Benefits:

  • Contains tester and all the most popular adapters needed to test heavy-duty trucks and equipment
  • Includes our TU-15gauge with easy to read red and black dial and snap-in lens

Adapters included in this set: TU-15-4A, TU-15-8, TU-15-9, TU-15-11A, TU-15-12A, TU-15-14, TU-15-17, TU-15-18A, TU-15-19, TU-15-20, TU-15-21, and TU-15-23.

 

IPA Super MUTT Mobile Universal Trailer Tester - Standard Edition 9008-SE

Quickly troubleshoot lighting, air brake and ABS systems with the industry's leading trailer tester. This intuitive and durable design is ideal for both on and off-site commercial trailer testing and repairs.

Electrical Testing (12/24 Volt Operation

  • Power lights: Manually, All-On, Auto Scan, or by Remote Control
  • Audible and visual alerts: cross, open, overloaded, and short circuit indication
  • Pulsar mode allows diagnostic repair
  • Advanced trailer wiring diagnostics
  • Amperage Readout and range (0-20 amps)
  • Cable testing
  • Ground failure detection: differentiates between wire and chassis ground

ABS Testing

  • Access ABS blink codes
  • Test ABS fault blink codes via Auxiliary and Brake Circuit activation (i.e. Meritor/Wabco, Bendix TABS-6 and Haldex systems)

Air Brake Testing

  • Performs leak down test on service and emergency lines
  • Remote control allows observation of slackers to measure and adjust pushrods
  • Real time, repetitive brake activation to find developing problems and verify leaking servo cans
  • Features an internal air regulator

Remote Control

  • 12-button remote control tests all trailer electric circuitry and air brake actuation, 200+ ft. range
  • Sync multiple remotes to one unit

Includes:

  • 12-Button Remote Control
  • 5' 7-Way Cable
  • 8' Glad Hand Hoses
Over Inflator and High Volume Indoor/Outdoor System(XDZ)

For precise and consistent tire inflation Haltecs Automatic Tire Inflator is the most advanced tire inflation equipment available today. Safe, reliable and accurate, it is also incredibly easy to use simply set the desired PSI umber on the inflator, connect the hose to the tires valve and thats it, Haltecs Automatic Tire Inflator does the rest. The built-in computer constantly checks the accuracy of the gauge, so theyre virtually maintenance free.
Features:
" Safe and easy to operate
" Inflates or deflates to desired pressure
" Extremely accurate extends tire life
" Faster operation than conventional gauges
" Detachable twelve-foot hose kit with clip on air chuck
" Large, easy to read back-lit digital read out
" Nitrogen capable
" Pressure range of 5-145 PSI
" Power-up pressure of 30 PSI
" Accuracy .3 PSI

INDOOR ONLY SYSTEM

89MDA provides highly accurate, reliable tire inflation for indoor applications
such as vehicle workshops, detailing bays, car rental outlets and service
centers. The 89MDA features an impact-resistant polycarbonate enclosure
and can be used for fixed or mobile operation.
Inflates a single tire at a time.

Safety Precaution
These products, as well as all tire tools, should never be used by persons unless they have been trained properly according to O.S.H.A. Regulation #29CFR 1910.177 entitled Servicing Single-Piece & Multi-Piece Rim Wheels.

PROBLEM:
10% Under-inflation = 4% loss of fuel*
10% Over-inflation = 10% loss of treadwear*
SOLUTION:
HALTEC AUTOMATIC TIRE INFLATOR SYSTEMS
*Fuel and tread wear estimates are based upon EPA and Goodyear studies.

Scorpion Jacks PJ15 15,000 lb. Capacity Pit Service Jack

The Scorpion PJ15 Pit Jack is designed for use inj Heavy Truck Service pits or can be used on above ground alignment ramp systems (Hunter & Bee-Line)


This jack will fit virtually any pit application due to the compact design (onlyh 34" wide) and expandable to 42" wide.


These jacks are designed to lift the vehicle to lift the vehicles across the axle using the lifting saddles provided (Low/Med/Hi)


Features:

  • Built in lock for safety
  • 15,000 lb capacity
  • Dual Hydraulic rams for lifting
  • Lift over 20" with built in safety lock
  • Convenient pull handle, powder coat paint & zinc plated components
  • Lift across the axle with the lifting saddles or lift on the frame!
  • Heavy-Duty Hydraulics and air motor
  • Special roller bearing wheels allow for effortless rolling
  • Loading...