Are you looking for:

Scorpion Jacks PJ15 15,000 lb. Capacity Pit Service Jack

The Scorpion PJ15 Pit Jack is designed for use inj Heavy Truck Service pits or can be used on above ground alignment ramp systems (Hunter & Bee-Line)


This jack will fit virtually any pit application due to the compact design (onlyh 34" wide) and expandable to 42" wide.


These jacks are designed to lift the vehicle to lift the vehicles across the axle using the lifting saddles provided (Low/Med/Hi)


Features:

  • Built in lock for safety
  • 15,000 lb capacity
  • Dual Hydraulic rams for lifting
  • Lift over 20" with built in safety lock
  • Convenient pull handle, powder coat paint & zinc plated components
  • Lift across the axle with the lifting saddles or lift on the frame!
  • Heavy-Duty Hydraulics and air motor
  • Special roller bearing wheels allow for effortless rolling
  • Digital Battery and System Tester with Integrated Printer
    Features and Benefits
    • Tests 6 and 12 Volt Batteries (40 – 2000 CCA); Tests 12 Volt and 24 Volt Vehicle Starting and Charging Systems
    • Tests multiple battery types, including Conventional, Maintenance Free, AGM, Gel Cell, Marine and Deep Cycle batteries
    • Built-in printer documents battery and system test results. Printer uses standard thermal paper available from any office supply store
    • Large, adjustable backlit display provides easy viewing in bright or low light environments plus 10’ cable leads for extra-long reach
    • Reverse polarity and over-voltage protection; Packaged in a protective case for secure transport and storage
    The new Digital Battery and System Tester with Integrated Printer, offers a complete testing solution for 6 and 12 Volt batteries and 6, 12 and 24 Volt charging systems. Compatible with a wide variety of battery types, it features easy, intuitive operation with quick, accurate assessment of battery condition and starting and charging system performance. Testing is quick and easy and allows the operator to perform either a battery test, system test or both from the home screen. The tester walks through the test sequence, prompting for key pieces of information and guiding the operator from one step to the next. The tester provides accurate assessment of both charged and discharged batteries and features temperature compensation for improved accuracy. The tester’s integrated printer provides easy service documentation. The printing sequence is clear and quick, with a completed printout in just seconds. In addition, the printing stage can be easily bypassed if a printout is not necessary. The tester also incorporates a number of features that improve convenience during testing, including reverse polarity protection, extra-long cable leads reaching 10’, a fully adjustable, brightly backlit screen for clear viewing in bright or low light environments and a convenient case for safe, secure storage.
    Kiene Starter Motor Adapter for Clutch Caddy

    The Starter Motor Adapter for the Kiene Clutch Caddy makes removing or installing starter motors a safe one person job.

    • Leaves both hands free to install the mounting bolts
    • Makes the job easier and faster

    Kiene Clutch Caddy sold separately

    Magnum + Balance Beads Case of 12 bags - 13 oz.
    • Timesaving, hassle-free tire balancing solution. No machines. No rebalancing.
    • Case with individually packaged bags containing the toss-in insert bag of tire balancing beads.
    • Big enough to never obstruct a valve core. No special valve core to install.
    • TPMS compatible.
    • 100% tempered glass. It cannot break, disintegrate, absorb moisture, freeze or stick together.
    • MAGNUM+ packaging as well as the beads are recyclable and eco-friendly.

    Our tire balancing beads earned their reputation over the years as a top-quality internal balancing compound that is completely safe for the tire and its components. There’s not a single balancing job that can’t be done with MAGNUM+, no matter the size or type of tire – truck, SUV/van, car and off-road tires, for summer and winter- you can trust the original internal balancing bead brand that’s been on the market for more than 25 years. Just toss the bag of beads in the tire and mount it as usual. Free of silica-based coating, recyclable and reusable. The beads will outlast your tires.

    Dynamic internal balancing will:

    • Eliminate vibrations caused by any heavy spots
    • Promote consistent tread wear and longevity of the tire
    • Improve gas mileage
    Kiene Pulling Chain For Wheel Grabber - Individual

    Replacement Chain for Wheel Grabber. Chains are sold individually.

    Chain Types & Usage:

    • Part # WW2101 - Steel wheels with 4" and larger hand holes.
    • Part # WW2102 - Aluminum wheels with 1-5/8" to 2-1/4" holes
    • Part # WW2107 - Ford 350 & UPS package cars
    • Part # WW2108 - Steel wheels with 2.9" diameter holes

    About the Wheel Grabber

    Galvanic electrolysis can literally freeze hub piloted wheels on their hub. In fact they can become so frozen to their hub that it can become a serious safety problem trying to remove them. Do any of the following techniques sound familiar: Swinging a 20 lb. sledge at the tire (hope your arms and back hold out); Placing a porta power between the frame and wheel (stand back); Loosening the lug nuts and driving the vehicle around the block (and hope the wheels don't fall off before you get back to the garage). It sounds strange, but unfortunately these are some of actual techniques that have been used.

    • Works effectively on steel or aluminum wheels, drive axle, steer axle, or trailer.
    • Great for mobile service work.

    The Pulling Chains are hooked into the hand holes and their Safety Hooks are attached to the Wheel Grabber. Next, the Hub Socket is centered on the wheel hub. An impact wrench, applied to the Forcing Screw, uniformly tightens the Pulling Chains until the seized wheel is freed - without damage to the wheel or hub! SAFE, QUICK, SIMPLE!

    Loading...