Are you looking for:

Dayton & Dual Wheel Adapter for Big Truck Tire Step - (Adapter Bar Only)

The 5950 Dual Wheel Adapter must be used when using the Big Truck Tire Step on Dayton and dual wheels.

This adapter provides extra stability by resting against the tire when there is no rim to rest against. The Dual Wheel Adapter is included with the 5800 Super Single 2-Step and the 5300 Super Single 3-Step.

The Dual Wheel Adapter can be easily attached to any Big Truck Tire Step by sliding the adapter’s two attachment posts over the step’s rear stabilizing posts. Secure the adapter with the included screws and nuts.

Super Single Model numbers 5800 and 5300 come pre-drilled for the adapter. If using the dual wheel adapter with model numbers 5500 or 5100 you must: 1) Remove vinyl caps. 2) Slide on adapter and mark hole placement. 3) Drill holes in the stabilizing posts. 4) Attach Dual Wheel Adapter.

*Note: This is the adapter bar only. Steps are sold separately.

Kiene: Adapter, Ermeto End 1/2" - 20, 20 LH(M) with 60 Degree Seat x 1/2 - 20 LH(F)
Adapter, Ermeto End 1/2" - 20, 20 LH(M) with 60 Degree Seat x 1/2 - 20 LH(F) for DT-1300 Diesel Injector Nozzle Tester
Minimizer Stainless Bolt On Bracket Kit for Poly Truck Fenders TF and TA Series

Minimizer offers the best fender bracket systems in the industry.

The B600BTSA – Plastic Bolt On Bracket Kit offers a bracket that won’t stay bent; won’t stress crack; never needs paint; softens road vibration; and is made from 100% composite material.

You need brackets that won’t bend out of shape with the slightest tap or break and do nothing but cost you hard earned money. At Minimizer, our fenders AND brackets are guaranteed for life!

The B600BTSA – Plastic Bolt On Bracket Kit has brackets that have remarkable staying power – when bumped or bent they “give” slightly and spring back into shape without dents or paint chips. These brackets will last as long as you own your Minimizer fenders!

All kits come with the applicable mounting hardware for proper installation:

  • Bracket Arms
  • Plastic Center Bracket Assembly (Plastic Arm mounted to Steel Angle)
  • Plastic Angle/Height Support
  • Mounting Flanges, Mounting Bolts, and Spacers
  • All Bolts, Washers, and Nuts
  • Minimizer Plastic Bolt On Bracket Kit for Poly Truck Fenders for Half Fenders

    Minimizer offers the best fender bracket systems in the industry.

    The B4850BTPA – Plastic Bolt On Bracket Kit offers a bracket that won’t stay bent; won’t stress crack; never needs paint; softens road vibration; and is made from 100% composite material.

    You need brackets that won’t bend out of shape with the slightest tap or break and do nothing but cost you hard earned money. At Minimizer, our fenders AND brackets are guaranteed for life!

    The B4850BTPA – Plastic Bolt On Bracket Kit has brackets that have remarkable staying power – when bumped or bent they “give” slightly and spring back into shape without dents or paint chips. These brackets will last as long as you own your Minimizer fenders!

    All kits come with the applicable mounting hardware for proper installation:

  • Bracket Arms
  • Plastic Center Bracket Assembly (Plastic Arm mounted to Steel Angle)
  • Plastic Angle/Height Support
  • Mounting Flanges, Mounting Bolts, and Spacers
  • All Bolts, Washers, and Nuts
  • Buyers 6 Inch Clear Oval Backup Light Kit With 10 LEDs (PL-2 Connection, Includes Grommet And Plug)
    • Available in bulk (sold in multiples of 10) or as individual kits that include a PL-2 plug and grommet.
    • Backed with a limited lifetime warranty.

    Buyers Products 6 Inch Oval Backup Light with 10 LEDs is used on trucks and trailers to meet FMVSS/CMVSS 108 regulations.

    The light has a clear lens and a standard PL-2 connection. Available in bulk (sold in multiples of 10) or as individual kits that include a PL-2 plug and grommet for installation.

    Lights are backed with a limited lifetime warranty.

    Product Common Use: Truck, Trailers

    Loading...