Are you looking for:

EcoMaster 150 150-Gallon Stainless Heated Agitating Lift Parts Washer
  • Heavy duty steel construction for long lasting durability
  • Self-cleaning agitating platform lifts parts to top for easy loading and unloading
  • Filter regulator with auto drain
  • Adjustable agitation speed
  • Flow-through brush with polyester filaments for the toughest water-based cleaning applications
  • Durable, baked on powder coated epoxy finish
  • Not to be used with chlorinated solvents
  • Stainless steel spring-loaded door closures
  • Thermostat is preset to deliver optimal cleaning temperature of 110 degrees F
  • Includes backup thermostat (non-adjustable)
  • 6,000 Watt heater
  • Electrical plug not included
  • Stainless steel
  • Electrical plug not included
  • 12 Gauge construction
  • Platform dimensions: 28" W x 54" L
  • Overall Dimensions: 44-1/2" W x 64" L x 66-1/2" H
  • Inside Dimensions 37-1/2" W x 57" L x 37-1/2" H
  • Load Capacity: 750 lbs
  • Wheel Guard, 10 Hole 11-1/4" BC, Stud-Piloted 1-1/8" and 7/8" Studs
    Prevents rust, scale, corrosion, and galvanic electrolysis on disc wheels. Nylon separator plate, placed between the hub or drum and the wheel, and/or between two wheels on dual applications. The wheel-guard is highly recommended in severe applications where corrosion and/or wear has been identified as a problem. Both aluminum and steel wheels can benefit from wheel-guard.
    Wheel Guard, 10 Hole, 285.75mm B.C., Hub-Piloted, 22mm Studs, Unimount
    Prevents rust, scale, corrosion, and galvanic electrolysis on disc wheels. Nylon separator plate, placed between the hub or drum and the wheel, and/or between two wheels on dual applications. The wheel-guard is highly recommended in severe applications where corrosion and/or wear has been identified as a problem. Both aluminum and steel wheels can benefit from wheel-guard.
    Kiene: Connector Set, General Purpose for Case, Mack, Cat, Cummins

    General purpose connector kit provides components required to connect most hydraulic type fuel injectors to nozzle testing equipment. Connectors are double-threaded (Left and Right Hand) permitting quick connect/disconnecting to injectors. Provided with a handy plastic carrying case for storage of connectors, adapters, and fittings.

    Contents include:

  • (1) Connector Nut, M12 x 1.5 x 1/2 - 20LH (part # 4011)
  • (2) Connector Nut, M14 x 1.5 x 1/2 - 20LH (part # 4012)
  • (1) Connector Nut, M18 x 1.5 x 1/2 - 20LH (part # 4013)
  • (1) Connector Nut, 9/16 x 18NF x 1/2 - 20LH (part # 4014)
  • (1) Connector Nut, 5/8 - 18NF x 1/2 - 20LH (part # 4015)
  • (1) Adapter, Ermeto, 1/2-20LH 60 Deg. X 1/2-20LH (part # 4021)
  • (1) Rigid Connector, 9" Long (part # 4224)
  • Carrying Case (part # 300-2001)

  • Application:

  • 1. General Purpose
  • 2. J.I. Case
  • 3. Continental
  • 4. Ford Tractor
  • 5. Massey Ferguson
  • 6. Minnesota-Moline
  • 7. Perkins
  • 8. Peter
  • 9. Mack
  • 10. John Deere
  • 11. Caterpillar
  • 12. Hercules
  • 2,000 lb. Capacity High-Lift Transmission Jack for Trucks and Buses

    Features and Benefits:

    • For shops with in-ground or above-the-floor vehicle hoists
    • Low height of 41-1/2" allows transmission to be rolled out from under bus or other vehicle's frame, a clearance problem with competitor's jacks
    • Metered, foot-operated air pump allows effortless lifting of the transmission into place, controlling the load precisely during removal and installation
    • Operation is twice as fast as competitive jacks powered by a hand pump, and it costs less
    • A dedicated adapter that fits the popular Allison 500 and 600 series automatic transmissions in included

    Safety bypass prevents damage caused by a system overload. Covered by OTC Lifetime Marathon Warranty®.

    Loading...