Are you looking for:

Detailed Driver Vehicle Inspection Report (DVIR) - 2-Ply Carbonless (100 pcs)

2-ply inspection report, carbonless, book format, 5-1/2" x 8-1/2"


  • Helps satisfy DOT vehicle regulations 49 CFR 396.11 and 396.13
  • Detailed DVIR lists specific tractor and trailer parts to help simplify inspection; driver simply check off parts that need repair
  • Includes key regulations printed on inside front cover to remind of DOT-required procedures
  • Book format, 31 sets per book
  • Two plies
  • Carbonless
  • Measures 5-1/2" x 8-1/2"
  • Quantity of 100
  • Minimizer Plastic Bolt On Paddle Bracket Kit for Poly Truck Fenders 300 Series

    Minimizer offers the best fender bracket systems in the industry.

    The B300PBA Plastic Paddle Bracket Bolt-on Kit offers a bracket that won’t stay bent; won’t stress crack; never needs paint; softens road vibration; and is made from 100% composite material.

    You need brackets that won’t bend out of shape with the slightest tap or break and do nothing but cost you hard earned money. At Minimizer, our fenders AND brackets are guaranteed for life! How can Minimizer make such an offer? It’s simple – we have total confidence in the design and performance of our fenders and bracket kits.

    The B300PBA Plastic Paddle Bracket Bolt-on Kit has brackets that have remarkable staying power – when bumped or bent they “give” slightly and spring back into shape without dents or paint chips. These brackets will last as long as you own your Minimizer fenders – we guarantee it!

    All kits come with the applicable mounting hardware for proper installation:

    • Bracket Arms
    • Plastic Center Bracket Assembly (Plastic Arm mounted to Steel Angle)
    • Plastic Angle/Height Support
    • Mounting Flanges, Mounting Bolts, and Spacers
    • All Bolts, Washers, and Nuts
    Minimizer Stainless Bolt On Bracket Kit for Poly Truck Fenders TF and TA Series

    Minimizer offers the best fender bracket systems in the industry.

    The B600BTSA – Plastic Bolt On Bracket Kit offers a bracket that won’t stay bent; won’t stress crack; never needs paint; softens road vibration; and is made from 100% composite material.

    You need brackets that won’t bend out of shape with the slightest tap or break and do nothing but cost you hard earned money. At Minimizer, our fenders AND brackets are guaranteed for life!

    The B600BTSA – Plastic Bolt On Bracket Kit has brackets that have remarkable staying power – when bumped or bent they “give” slightly and spring back into shape without dents or paint chips. These brackets will last as long as you own your Minimizer fenders!

    All kits come with the applicable mounting hardware for proper installation:

  • Bracket Arms
  • Plastic Center Bracket Assembly (Plastic Arm mounted to Steel Angle)
  • Plastic Angle/Height Support
  • Mounting Flanges, Mounting Bolts, and Spacers
  • All Bolts, Washers, and Nuts
  • Brute 70" LosiderSafe - W/Rear Beadsafe Roller Drawer - Drivers Side - Black

    Brute 70" LosiderSafe - w/Rear Bedsafe Roller Drawer - Commercial Class - Drivers Side - Black

    • Low Profile Above Bed Rail
    • Increased Rear View Vision
    • Beveled Lid Design
    • Full Rubber Weather Seal
    • Full Metal Shield Protecting Latches
    • 2 Gas Props in Upper Compartment
    • Extra Wide Design
    • Made with .063" Thick Aluminum Diamond Tread
    • Fully Reinforced Lid
    • "J" Hook, No Drill Into Side Rail Installation
    • Top Opening Compartment w/Removable Dividers
    • Rear Bedsafe Roller Drawer Comes Equipped w/Removable Dividers
    • Single Touch Safety Plunger Latch on Drawer

    Dimensions:

    • Length: 70"
    • Top Width: 17"
    • Height: 15-1/2"
    • Bottom Width: 11-1/2"
    • Bottom Height: 11"
    Buyers .75 Inch Round Marker Clearance Lights - 1 LED Red With Stripped Leads
    • Wiring options include leads with blunt cut ends or .180 in. male bullet connector.
    • PC rated to produce light at a 90° angle left and right of center.
    • Mounting grommet is included.
    • Backed with a limited lifetime warranty.

    Buyers Products 0.75 Inch Round Marker Clearance Lights with 1 LED are used on trucks and trailers to meet FMVSS/CMVSS 108 regulations.

    The round marker lights have a single LED and are PC rated to produce a 90° angle left and right of center when properly mounted.

    Lights are available in red, clear, or amber with smooth or faceted lenses. They mount with either blunt cut leads or .180 in. male bullet connectors. The clear lights cannot be used as a marker light.

    Lights are sold in bulk and backed with a limited lifetime warranty.

    Product Common Use: Trailers, Service Vehicles, Dump Trucks, Work Trucks

    Loading...