Are you looking for:

5 HP 80 Gallon Vertical 2-Stage Electric Reciprocating Air Compressor

Features and Benefits:

  • Start-Stop pressure switch control
  • ASME safety valves fully enclosed belt guard
  • Tank drain and discharge valve
  • 208-230 volt, single phase
  • 2 year full warranty

No magnetic starter required. This compressor comes complete with everything you need to optimize your work and minimize down time. 18.5 cfm @100 PSI.

Jump-N-Carry 12 Volt Jump Starter - 1700 Peak Amps, 425 Cranking Amps

Features and Benefits

  • Rugged, durable and reliable 12 Volt jump starting for professional applications
  • Delivers 1700 Peak Amps, 425 cranking amps of jump starting power
  • Long, 46" #4 gauge heavy duty cables allow the unit to be positioned in the ideal location during jump starting
  • Volt gauge provides an accurate, detailed state of charge for the onboard battery
  • Built in charger will never get lost and works with any US extension cord
  • NOT compliant for California use, order SOLJNC660C instead

Trusted by professionals the world around as their go-to jump starter, the SOLJNC660, with Clore PROFORMER battery, will not disappoint. Ideal for use in a wide variety of jump starting environments, including automotive, marine and industrial – try it once and you'll see why so many technicians will accept only the JNC660. Includes a 12 volt outlet to power accessories and a Product for Life coupon that allows the end purchaser a one-time product repair for a low, fixed fee, regardless of reason for damage/problem. 1 year limited warranty.

Supercedes: KKJ990681

Kiene Wheel Wiz Hub-Piloted Wheel Puller - With Drive Axle Socket (WW2151)

The Kiene Wheel Whiz is the proven successful way to remove seized hub-piloted wheels.

The Kiene Wheel Whiz is the original hub-piloted wheel puller used for transit buses and other heavy-duty fleet applications.

  • The Wheel Whiz quickly and safely removes seized hub-piloted wheels from steering, drive and trailer axles.
  • The Wheel Whiz uses five pulling chains to remove even the most stubborn wheels safely and allow the vehicle to be returned to service quickly.
  • The Wheel Whiz works effectively on steel or aluminum wheels.
Pulling Chain Options
  • WW2101: Steel wheels with 4" and large hand holes
  • WW2102: Aluminum wheels with 1-5/8" holes
  • WW2104: Wheels with 1-1/2" holes
  • WW2105: Supersingles
  • WW2107: Ford 350 & UPS package cars
  • WW2108: Steel wheel with 2.9" diameter holes
  • WW2109: Two hole wheels with valve stem interference
Hub Socket Options
  • WW2151: Drive Axle Socket - Fits most Eaton & Meritor(Rockwell) drive axles
  • WW2152: Mini-Bus Socket - Fits most smaller hub caps on some buses
  • WW2153: Bus Steering Axle & Euclid Trailer Socket - CR1798, Stemco 343-4176 & 343-4080 and Euclid hub caps
  • WW2154: Trailer Socket - Fits most Stemco hub caps and CR1643 & CR1743
  • WW2155: Freuhauf Trailer Socket
  • WW2156: Pro Par Trailer Socket: Fits Pro Par hub caps
Precision Instruments M2R200HX 3/8" Drive Torque Wrench 30-200 lb.in.

Engineered, precision bearing surfaces extend the calibrated life of the M line to as many as 60,000 cycles or more and ensure the most reliable performance possible. In addition to flawless operation at release, calibration is completely external, unlike traditional mechanism that require disassembly and the replacement of blocks and shims.

  • Drive Size: 3/8"
  • Drive Type: Rigid Ratchet
  • Primary Units: lb.in
  • Capacity: 30-200
  • Increments: 1
  • Effective Length at 20% of Full Scale: 8.18" Effective Length at Full Scale: 7.28"
  • Maximum Overall Length: 9.87"
  • Minimum Overall Length: 8.97"
  • Weight: .85 lbs. (w/plastic case): 1.50 lbs.
  • Finish: Nickel / Chrome
  • Ratchet kit: R21AR-RK
  • Meets or Exceeds the following Specifications: GGG-W-686C, ANSI B107.14M
OBDII Adapter for US13 Mack/Volvo Powered Trucks for Original NEXIQ USB Link 1

The NEXIQ adapter cable provides interface between USB-Link and US13 Mack/Volvo Powered Trucks.

Coverage:

  • 2013 to Present
  • Connects to US12 Mack/Volvo Powered Trucks

For use with USB-Link 125032 and Wireless Vehicle Link 2 (WVL2) 129048

NOTE:  This adapter is designed to be compatible ONLY with the original USB-Link.  Order P/N 493013 if you are needing to purchase the OBD-II J1962 Adapter for a USB-Link 2 (Either P/N 124032 or 124034).

Loading...