Are you looking for:

Dayton & Dual Wheel Adapter for Big Truck Tire Step - (Adapter Bar Only)

The 5950 Dual Wheel Adapter must be used when using the Big Truck Tire Step on Dayton and dual wheels.

This adapter provides extra stability by resting against the tire when there is no rim to rest against. The Dual Wheel Adapter is included with the 5800 Super Single 2-Step and the 5300 Super Single 3-Step.

The Dual Wheel Adapter can be easily attached to any Big Truck Tire Step by sliding the adapter’s two attachment posts over the step’s rear stabilizing posts. Secure the adapter with the included screws and nuts.

Super Single Model numbers 5800 and 5300 come pre-drilled for the adapter. If using the dual wheel adapter with model numbers 5500 or 5100 you must: 1) Remove vinyl caps. 2) Slide on adapter and mark hole placement. 3) Drill holes in the stabilizing posts. 4) Attach Dual Wheel Adapter.

*Note: This is the adapter bar only. Steps are sold separately.

OBDII Adapter for US13 Mack/Volvo Powered Trucks for Original NEXIQ USB Link 1

The NEXIQ adapter cable provides interface between USB-Link and US13 Mack/Volvo Powered Trucks.

Coverage:

  • 2013 to Present
  • Connects to US12 Mack/Volvo Powered Trucks

For use with USB-Link 125032 and Wireless Vehicle Link 2 (WVL2) 129048

NOTE:  This adapter is designed to be compatible ONLY with the original USB-Link.  Order P/N 493013 if you are needing to purchase the OBD-II J1962 Adapter for a USB-Link 2 (Either P/N 124032 or 124034).

Detailed Driver Vehicle Inspection Report (DVIR) - 2-Ply Carbonless (100 pcs)

2-ply inspection report, carbonless, book format, 5-1/2" x 8-1/2"


  • Helps satisfy DOT vehicle regulations 49 CFR 396.11 and 396.13
  • Detailed DVIR lists specific tractor and trailer parts to help simplify inspection; driver simply check off parts that need repair
  • Includes key regulations printed on inside front cover to remind of DOT-required procedures
  • Book format, 31 sets per book
  • Two plies
  • Carbonless
  • Measures 5-1/2" x 8-1/2"
  • Quantity of 100
  • OBDII Adapter for US13 Mack/Volvo Powered Trucks for Original NEXIQ USB Link 1

    The NEXIQ adapter cable provides interface between USB-Link and US13 Mack/Volvo Powered Trucks.

    Coverage:

    • 2013 to Present
    • Connects to US12 Mack/Volvo Powered Trucks

    For use with USB-Link 125032 and Wireless Vehicle Link 2 (WVL2) 129048

    NOTE:  This adapter is designed to be compatible ONLY with the original USB-Link.  Order P/N 493013 if you are needing to purchase the OBD-II J1962 Adapter for a USB-Link 2 (Either P/N 124032 or 124034).

    BVA-2100 Heavy Duty Battery and Electrical Analyzer with Cart and Printer

    This is the ultimate battery and electrical system tester, incorporating Auto Meter's Advanced DPL Technology. The BVA-2100 can be used for both automotive and heavy-duty applications. Featuring our patented automated voltage drop technology; the BVA-2100 accurately pinpoints electrical system problems (battery, starter, alternator, wiring, and connections). Product firmware includes J1708 compatibility with optional J1708 cables.


    Features:

  • Ultimate battery and system tester
  • Best of Both Worlds…Accuracy via Patented Resistance & Load Test
  • Fully Automated Load
  • Two separate and specific menus for automotive and heavy-duty truck applications
  • Powerful microprocessor for fast and accurate results
  • Tests batteries, starters, alternators and cables
  • Advanced DPL technology for true load results
  • Patented automated voltage drop tests
  • Optional J1708 communication cables for heavy-duty vehicles
  • Stores the previous 150 test results
  • Optional internal printer and PC cable
  • Includes internal battery charger, inductive amp clamp and external volt leads
  • Reverse polarity protected
  • Includes ES-8 Cart & AC-14 Printer

  • Specs:

  • Applications: 6 & 12V Automotive, Marine, & Commercial Starting Batteries. 12 & 24V Starting & Charging Systems.
  • 6V Tests: Battery Check and Load Test
  • 12V Tests: Battery Check and Load Test, Alternator/Stator Diodes and Regulation Test, Starter Draw Test
  • 24V Tests: Alternator/Stator Diodes and Regulation, Starter Draw Test
  • Operational Temperature: 0-120ºF
  • Operational Humidity: 0-85%
  • Dimensions: 13"x12"x9.5"
  • Weight: 34 lbs
  • Battery Voltage: 6 & 12 Volt
  • Battery Types & Voltage: Flooded & AGM
  • Battery Range: 100-1600 CCA
  • Automated Load: 400 Amp
  • Alternator Test: Yes - Amperage Output and Regulated Voltage
  • Stator Diode Test: Yes
  • Starter Draw Test: Yes
  • Load Leads: 10ft - 6 Gauge
  • Memory: 150 Tests
  • Language: English & Spanish
  • Internal Battery: 6 Volt - 7.6 AH
  • External Volt Leads: Yes - 20ft
  • Cooling: Fan Cooled
  • Loading...