Are you looking for:

CleanMaster 230 30-Gallon Drum Mounted Parts Washer
  • 30-gallon capacity drum sold separately
  • 32" L x 24" W x 7-1/2" D inside tank
  • Built to last for years of reliable service
  • For use with petroleum solvents with a flash point over 104 degrees F
  • Not to be used with chlorinated solvents
  • Meets 0.75 freeboard requirements
  • Galvanized drawn steel tank
  • Durable, baked on powder coated epoxy finish
  • Heavy-duty pump
  • Single on/off switch for pump and optional light kit
  • "Stay-Put" flexible metal hose directs and holds power rinse where you want it with flow-thru brush
  • Spring loaded door closure with 165 degree F fusible link
  • Kiene DPF Adapter for Clutch Caddy

    The newest Clutch Caddy Adapter simplifies the removal and installation of Diesel Particulate Filter (DPF) units. The rugged, compact, low profile design allows the unit to be moved easily under and around the truck.

    Includes:

    • Matched set of ballistic nylon JackSacks that conform to all shape and size DPFs
    • Support tray
    • 2" load hugger safety strap to secure the load

    Clutch Caddy Sold Separately

    Beta 1517/200 Three-Leg Self Locking Puller

    Beta three-leg self locking puller


  • 40mm - 200mm
  • Simultaneous leg opening
  • Self locking effect
  • Double Nut 22mm, 19mm
  • EcoMaster 4000 30-Gallon Heated Parts Washer
  • Corrosion resistant heavy-duty pump
  • Heavy-duty roto-cast thermoplastic cleaning basin - large cleaning capacity
  • Two removable stainless steel shelves
  • Parts washer completely supported by heavy-duty stand
  • Ground fault circuit interrupter for added shock resistant safety
  • Filter system prolongs fluid life
  • Soaking capacity up to 30 gallons
  • Spigot with fluid control valve
  • Designed for non-flammable water-based cleaning solutions
  • Heater thermostatically controlled-preset to 110 degrees
  • Spring loaded stainless steel lid closure with "fire link"
  • Low level fluid sensor
  • Mechanical agitation - 15 spray heads with fluid control valve
  • Dual switches - heater and pump
  • Flow-thru brush with adjustable fluid control
  • Tank dimensions 26" W x 36" L x 18" D
  • Overall Dimensions 29" W x 44" L x 67" H
  • EcoMaster 150 150-Gallon Stainless Heated Agitating Lift Parts Washer
  • Heavy duty steel construction for long lasting durability
  • Self-cleaning agitating platform lifts parts to top for easy loading and unloading
  • Filter regulator with auto drain
  • Adjustable agitation speed
  • Flow-through brush with polyester filaments for the toughest water-based cleaning applications
  • Durable, baked on powder coated epoxy finish
  • Not to be used with chlorinated solvents
  • Stainless steel spring-loaded door closures
  • Thermostat is preset to deliver optimal cleaning temperature of 110 degrees F
  • Includes backup thermostat (non-adjustable)
  • 6,000 Watt heater
  • Electrical plug not included
  • Stainless steel
  • Electrical plug not included
  • 12 Gauge construction
  • Platform dimensions: 28" W x 54" L
  • Overall Dimensions: 44-1/2" W x 64" L x 66-1/2" H
  • Inside Dimensions 37-1/2" W x 57" L x 37-1/2" H
  • Load Capacity: 750 lbs
  • Loading...