Are you looking for:

Exhaust Back Pressure Gauge

Features and Benefits:

  • Includes a universal adapter for vehicles with thermacor systems
  • Works on domestic and imported vehicles
  • Exhaust back pressure gauge with universal adapter

Now you can quickly read back pressure to determine the amount of restriction in an exhaust system. This gauge accurately measures through the oxygen sensor hole. Its large dial clearly shows pressure from 0-8 PSI. The system has a stainless steel braided tube to with-stand high-heat conditions.

WAR-LOK: King Pin Lock TKP-10DP

Use the War-Lok King Pin Lock to secure untethered trailers

Protect expensive cargo stored in a dropped trailer from a would-be thief. The War-Lok King Pin Lock is long lasting and dependable.

Lock Exterior

The cast steel King Pin Lock is nearly impenetrable.

Features:

  • Conical shape
  • Convenient handle included
  • Made of cast steel

Lock Interior

Like all WAR-LOK products, the King Pin Lock comes with a nine cylinder disk locking mechanism. This makes it nearly impossible for a thief to pick your lock.

Keying Options

Key your locks differently, alike, or alike to a master key. Furthermore, newly purchased locks can be keyed alike to an existing lock. WAR-LOK Cares About Your Security: WAR-LOK will verify ownership before any key is copied. The WAR-LOK Assembly Team cuts every key in Dallas, Texas, USA.

NOTE: Not for use with RV / 5th Wheel trailers

 

Brake Sentry: Visual Brake Stroke Indicators

Equipping brake chambers with BrakeSentry provides drivers and technicians with a significant advantage, a quick and effective means to visually inspect and identify any brake out-of-adjustment conditions conditions that ordinarily remain undetected and expose fleets to the high costs, risks and liabilities associated with trucking's deadliest and most frequently cited defect.

By using BrakeSentry, the industry prescribed applied stroke inspection method can now be performed faster, safer and much more efficiently without the need to crawl under vehicles to physically mark and measure pushrod stroke. A simple visual inspection of stroke measured in 1/4" increments gets the job done.

BrakeSentry reduces brake inspection time from an average 25 minutes per unit to less than 2 minutes. That's more than an 85% savings in labor time!

BrakeSentry reduces costs, risks and liabilities and improves every aspect of brake safety, maintenance and compliance.

BrakeSentry- Advantages, Benefits & Features

  • Reduces PM inspections by more than 85%
  • Quickly identifies failures and defects for prompt correction
  • Eliminates the need to physically reference and measure at each wheel position
  • Eliminates damaging manual adjustments to auto slacks
  • Reduces safety lane inspection time
  • Provides an effective troubleshooting aid to mechanics
  • Provides a valuable aid to drivers performing pre/post trip inspections
  • Reduces costly downtime, OOS violations and fines

BrakeSentry is easily installed in 3-minutes with no special tools required. It is made from a flexible and unbreakable material and fits all brake chambers with external 5/8" push rod.  Brake Sentry is non-invasive and non-obstructive, and has a dual function of stroke indicator and brake chamber seal. There is no need to disassemble existing components and its functionality and visibility are not affected by road dirt.

COST BENEFIT ANALYSIS

Example: 50 tandem axle trucks. Each receiving one PM inspection per month. Average time to properly inspect brake stroke adjustment at 25 minutes using the industry prescribed Applied Stroke method. (Requires referencing each brake chamber's push rod while brakes are released, then measuring push rod travel at each wheel position with brakes applied)

Without BrakeSentry:

50 vehicles x 25 minutes = 1,250 or 20.8 hours per month

20.8 hours per month x 12 months = 249.6 hours per year

Average labor rate of $40.00 per hr x 20.8 hours = $832.00 per month

$832.00 per month x 12 months = $9,984.00 per year

The industry prescribed Applied Stroke method can now be done in a fraction of the time without having to mark and measure stroke at each wheel position.

With BrakeSentry:

50 vehicles X 2 minutes = 100 minutes or 1.7 hours per month

1.7 hours per month X 12 months = 20.4 hours per year

$40.00 (labor rate) X 1.7 hrs = $68.00 per month

$68.00 per month X 12 months = $816.00 per year

Comparison:

249.6 hrs/yr
W/O BrakeSentry $9,984.00 per yr
With BrakeSentry $816.00 per yr 20.4 hrs/yr
SAVINGS $9,168.00 per yr 229.2 hrs/yr

Each kit contains product to complete one axle / two chambers.

Each kit includes 2 indicators, 2 clips, 2 gauges + 2 brackets & fasteners

18 Gallon Polyethylene Portable Oil Drain
  • Red translucent tank allows for easy viewing of oil level
  • 18" diameter funnel with strainer
  • 4" heavy-duty casters
  • Hand grips on top and bottom
  • Spout for evacuation

    8 Gallon Drain Adjusts from 48" to 67" (not shown)

    18 Gallon Drain Adjusts from 48" to 71" (shown)

     

  • Series 900 Oil Change System

    Features

  • Electronic controller - prompts for oil sample, oil amounts, and audio alerts
  • Uses ESOC patented "Spill Free" quick connect drain fittings, which ensures a clean "No Mess" operation
  • Semi-automatic Oil Sampler provides uncontaminated sample
  • Usability on-site in a facility or off-site in a service vehicle
  • Requires only connection s to shop air, fresh oil supply, and waste oil tank

  • Benefits

  • Evacuates 40 quarts of oil within 10 minutes
  • Saves an average 15 minutes compared to using conventional gravity drain method
  • Automatic shut off when oil pan is empty
  • Frees up technician to perform other tasks
  • Loading...