Are you looking for:

Hein-Werner Axle Jack with 3" Extension - 25 Ton

The Hein-Werner 25 Ton Air Truck Axle Jack is a compact, powerfully designed axle jack with a capacity of 25 tons.

  • Large 8" rubber wheels
  • Low height allows lifting from axle or suspension
  • Pressure relief valve prevents overloading
  • Rapid two-speed air hydraulic action quickly advances ram to load
  • Specially coated ram prevents rust and extends jack life
  • Air-powered ram retract
  • 3" extension Included
  • Capacity: 25 Tons (50,000 lbs./22,680 kgs)
  • Lifting height: 21" with extension
  • Max Air Pressure: 200 PSI
55 Ton Air Hydraulic Aluminum Jack

Features and Benefits:

  • 55 Ton capacity, 6" stroke
  • Unit has a collapsed height of 10.5", extended height of 16.5"
  • Lightweight only 29 lbs.
  • Uses any 10,000 PSI pump
  • Excellent for off highway tire work and is the preferred jack for road service
Dump-Lok - Dump Body Safety Stand (Standard Top - 4-7/16 in Frame)

Dump-Lok dump bed braces are an engineering breakthrough in the workplace. Dump-Lok dump bed braces safely hold dump boxes at angles higher than most manufacturer body props, giving workers safe access to more areas underneath the dump bed.

  • Sold As A Pair. Intended to be used as a pair
  • Used Universally on any brand dump box
  • Equipped with high grade, high tensile steel chains to further ensure safe repairs
  • Flat Top Model for offset frame beds and trailers
  • Fits up to 4-7/16" flange - 3-1/2 is standard

OSHA has issued citations to employers for failing to provide lockout procedures while employees were working under the dump body of dump trucks. They have recognized the hazard of unsecured dump beds and have recommended using an alternative "truck bed brace bracket".

  • Overall Height: 21"
  • Overall Width: 6"
  • Overall Length: 12.75"
  • Maximum Capacity (pair): 50,000 lbs
1/2in PneuMasterAir Electric Air Compressor Drain

Features and Benefits:

  • Automatically drains compressor tanks, receiver tanks or filters
  • Drain interval is adjustable between 1 and 60 minutes
  • The purge time can be adjusted from 1 to 30 seconds
  • Maximum operating pressure is 200 psig

The unit includes a manual override, six-foot power cord and Y strainer.

Chrysler/Mitsubishi Truck Ball Joint Adapter Set

Features and Benefits:

  • 35 adapters included to remove and install ball joints
  • Vehicle application chart and diagrams included
  • Works on upper and lower ball joints on 1996-2008 Chrysler, Dodge, Jeep,Plymouth, and Mitsubishi Trucks, Vans, and SUV’s with press in ball joint
  • For use with OTC USA made C frame, 7248
  • Does not include the 7248 C frame press
Loading...