Are you looking for:

EngineEar® Electronic Stethoscope

Features and Benefits:

  • Save time when trouble shooting
  • Amplifies sound while shutting out surrounding noise
  • Non-conductive microphone will not zap computer cicuitry
  • Flexible shaft reaches the tightest areas
  • Carrying case included

Pinpoints noise and location of worn bearings and bushings, noisy valves and lifters, broken or worn gear teeth, faulty fuel injectors, wind or air leaks, annoying squeaks and rattle.

Scorpion Jack TJ12 Stationary 25,000 lb. capacity Truck Jack

The Scorpion Installed In-Ground lift is semi-recessed in your shop floor. This is a semi-inground installation is an ideal solution for those shops that perform a lot of tire service and Brake Service. This is an installed version of the ScorpionTJ12 service jack and it offers a perfect combination of speed, efficiency, ease of use and value. The Scorpion Installed lifts are much less expensive than your standard above- ground options or for that matter the in-ground options too.


These jacks are designed to lift the vehicle across the axle using the lifting saddles provided (Low/Med/Hi). So you lift the whole front end or axle assembly in one go. There is a tire spotting dish for quick set up, and a remote control to allow the operator to check the load.


There is a built in lock for safety and other convenience features.


The lifts come with a control station housing the pump unit and a 20 Ft. Remote control so the operator can spot the load.


Features:

  • 25,000 Lb capacity
  • Dual hydraulic rams for lifting
  • Lift over 20" with a built in safety lock
  • Lift across the axle with the lifting saddles or lift on the frame
  • Heavy-duty hydraulics and air motor

  • Choose between:

  • Above Ground install - 8" Driver Over Height
  • Semi In-Ground install - 4.25" Drive Over Height
  • In-Ground Install - Flush mount with 0" Driver Over Height
  • Goodall 20 ft. 2 Gauge, 500 Amp (14-202)

    Heavy-Duty 2-Gague 500 Amp

  • Twin extruded jacket
  • Cable remains flexible to -40 degree F
  • Replaceable jaws, all copper wire
  • 15 ft
  • Steel Topside Toolbox Black 96 in.
  • Large 14" tall door opening and the recessed door provide easy access to spacious storage area
  • Full length stainless steel continuous hinge on doors offers a sturdy, durable and smooth performance
  • Full open door (remove cable and door opens completely)
  • Replaceable doors
  • Reinforced door backbone strengthens integrity of door and protects latch mechanism
  • Rain channel and door gasket keep moisture and dust out
  • 16-gauge steel box; 14-gauge steel doors
  • Stainless steel folding T-handle with lock for security (two per door on 96")
  • Optional trays require no drilling; easy to remove
  • Black powder coat finish
  • All mounting hardware included
  • Support legs mount directly into bed floor, not into fender
  • Thick, 3" wide rubber pad protects truck side rail
  • No drilling in side rail; J-bolts fasten under bed lip
  • Individually boxed for shipping
  • Two Doors

  • Buyers # 1702960

    H x D x W Size: 16" x 13" x 96"

    Color: Black

    Quick Changer Oil Drain Plug - 3/8 in - 18 NPT

    Changing your oil can be a messy, time-consuming task. Waiting for the engine to cool wastes valuable shop time. Spilled hot oil makes a mess and, it can burn!

    Now convert every vehicle into a Quick-Changer vehicle.

    Now you can eliminate these hassles by replacing your standard oil drain plugs with the innovative Quick Changer oil-drain system. It takes only a few minutes, with no special tools required.

    Once you've installed the Quick Changer oil drain valve, you can quickly and easily drain the oil at any time, even when the engine is hot. Actually, draining the oil at high temperatures results in a cleaner flush, since the larger dirt particles drain out with the oil.

    No more stripped-out oil pans.

    Just connect the drain hose to the Quick-Changer valve, which opens automatically. When finished, disconnect the hose. The valve shuts automatically and cleanly. No more mess. No more spilled oil.

    Best of all, by eliminating conventional drain plugs, the Quick Changer system prevents oil-pan threads from being stripped. Your oil pans last longer, saving you money. The valve doesn't extend beyond the threaded portion of the drain.

    Just look at these Quick-Changer advantages:

    • Eliminates stripped threads and frozen drain plugs
    • Is fully leak-proof unique design prevents accidental valve openings
    • Draws oil samples quickly and easily, with full control over oil flow
    • Valve and drain assembly fabricated in corrosion-resistant brass
    • Available in metric and U.S. sizes to fit all engines
    • Safe, clean, environmentally friendly operation
    • Meets rigorous independent test lab standards
    • Drains oil faster than conventional drain plugs
    Loading...