Are you looking for:

Esco: Tire Mounting Clamp
For European style rim clamp tire changers.
Acts like a third and fourth hand.

Clamp holds tire bead in drop center. Clamps quickly to rim, won't allow tire to "walk".

Plastic, will not mar or scratch decorative or alumium rims.
Back Buddy II Adapter Set for Humvee

TSI #6067 - MKHMV Back Buddy II Adapter

Only one required. Adapter connects directly to 8 stud inboard hubs. Studs are 5-1/2" on center for Hummer/Humvee geared hubs

Cheetah Magnum Bead Seater Aluminum

The CH-13 can be used in the shop with the necessary parts when the tire is horizontal or vertical, as a field unit where the tires remain on the equipment. With the new aluminum tank a 50% weight savings is achieved compared to the steel tank.

Use in the shop when the tire is horizontal or vertical, as a field unit where the tires remain on the equipment. Aluminum tank has 50% weight savings compared to the steel tank. 

specifications: 20" wide x 28" length x 15" height ; 36 lbs

Dayton & Dual Wheel Adapter for Big Truck Tire Step - (Adapter Bar Only)

The 5950 Dual Wheel Adapter must be used when using the Big Truck Tire Step on Dayton and dual wheels.

This adapter provides extra stability by resting against the tire when there is no rim to rest against. The Dual Wheel Adapter is included with the 5800 Super Single 2-Step and the 5300 Super Single 3-Step.

The Dual Wheel Adapter can be easily attached to any Big Truck Tire Step by sliding the adapter’s two attachment posts over the step’s rear stabilizing posts. Secure the adapter with the included screws and nuts.

Super Single Model numbers 5800 and 5300 come pre-drilled for the adapter. If using the dual wheel adapter with model numbers 5500 or 5100 you must: 1) Remove vinyl caps. 2) Slide on adapter and mark hole placement. 3) Drill holes in the stabilizing posts. 4) Attach Dual Wheel Adapter.

*Note: This is the adapter bar only. Steps are sold separately.

Big Cheetah Bead Seater - 60 Gallon Tank

The CH-60 is designed to be used in the shop to seat the bead on large tubeless tractor tires.  The CH-60 can seat the bead on these large tires whether they are in the vertical or horizontal position.  The dual barrels can be easily adjusted to handle 24" to 54" wheel diameter.  The adjustable barrels are able to fit over the wheel weights on rear farm tractor tires when seating the beads while the tire is on the tractor.

This product is listed as "Complete" due to the additional items provided. Package includes: 60 gallon tank, Adjustable dual barrels, 20' Whip Hose, and (2) 2 1/2" x 8' discharge hoses.

The dual barrels can be easily adjusted to handle 24 to 54 wheel diameter.

specifications: 36" wide x 21" length x 54" height ; 300 lbs

Loading...