Are you looking for:

Gas Manifold Pressure Test Kit

Features and Benefits:

  • Use this handy kit to measure natural gas or LP gas pressure across appliance manifolds from 0-35" of water column
  • Test gas stoves, furnaces, dryers and other gas appliances
  • Economical and accurate - easier to use than a manometer
  • Diaphragm gauge is calibrated in inches of water column, also shows ounces per square inch
  • Includes fitting for quick connection to the appliance manifold

Packed in high impact plastic case for protection during transit and use.

Master Ball Joint Adapter Set

Features and Benefits:

  • Includes receiver tubes and removing installing adapters needed to work on most GM, Ford, and Dodge two- and four-wheel drive vehicles, through 1997. Application chart included
  • Works on press-fit upper and lower ball joints
  • Set also includes the No. 7917 live center forcing screw plug, and a plastic storage/carrying case

This set was created specifically to expand the capability of your No. 7249 ball joint service set. It includes all the receiver tubes and removing/installing adapters needed to work on press-fit upper and lower ball joints on most GM, Ford, and Dodge 2- and 4-wheel-drive pickups, vans, and sport utility vehicles, through 1997.

Scorpion Jacks PJ15 15,000 lb. Capacity Pit Service Jack

The Scorpion PJ15 Pit Jack is designed for use inj Heavy Truck Service pits or can be used on above ground alignment ramp systems (Hunter & Bee-Line)


This jack will fit virtually any pit application due to the compact design (onlyh 34" wide) and expandable to 42" wide.


These jacks are designed to lift the vehicle to lift the vehicles across the axle using the lifting saddles provided (Low/Med/Hi)


Features:

  • Built in lock for safety
  • 15,000 lb capacity
  • Dual Hydraulic rams for lifting
  • Lift over 20" with built in safety lock
  • Convenient pull handle, powder coat paint & zinc plated components
  • Lift across the axle with the lifting saddles or lift on the frame!
  • Heavy-Duty Hydraulics and air motor
  • Special roller bearing wheels allow for effortless rolling
  • Branick Model 350 Wall Mount Nitrogen Inflation System
    • Best Air to Nitrogen Ratio on the Market at 1.9:1
    • PRISM Membranes, the Industries Best
    • Fully Front Mounted Controls for Ease of Use
    • Simple Operation
    • Air Input/Nitrogen Output Pressure Gauges
    • Wall Mounted to Maximize Space

    If floor space is hard to come by, and complete mobility isn’t necessary, the Branick line of wall-mounted nitrogen generators is for you. Speed and purity are not compromised with our wall-mount units that range from entry-level to high-volume applications. The model 350 typically services motorcycles to passenger vehicles. Because of the PRISM Membrane, the system also acts as an air dryer, which means the system produces a more consistent purity over the lifespan of the machine. Intended for the smaller dealer, the 350 uses the same membrane technology as larger systems and requires minimal input pressure.

    Professional Air / Hydraulic Pump

    Features and Benefits:

    • Develops 10,000 PSI at 100 PSI air pressure
    • 3/8" NPTF oil port
    • 98 cu.in. usable oil capacity in plastic reservoir
    • Weight: 15 lbs., 3 oz.


    With shop air as the energy source, these pumps have the power and oil capacity (80 cu. in. usable oil) to drive even the large 55-ton rams.  They are ideal all-around power sources for dozens of body, frame, and alignment applications. Also can be used with a variety of rams, presses, and hydraulic pullers operating at up to 10,000 PSI.  An internal relief valve protects the hydraulic components regardless of hydraulic pressure.

     

    Loading...