Are you looking for:

7-Ton Multi-Purpose Bearing and Pulley Puller Kit

Features and Benefits:

  • Wide Spread Crossbar with 3 pin-hole @ 7-1/4” to 9”
  • 2 pair of long reach jaws gives user reach options of 5-1/2” and 9-1/2”
  • 2 long reach forcing screws (live center) for pushes of 4-1/2” to 10-1/2”
  • Accepts shorter jaws from 4534 kit
  • 7 Ton version of our Multipurpose Bearing and Pulley Puller Set

Uses Classic "H" Bar style puller block for 7" to 11" applications, has two sets of jaws where reaches of five to nine+ inches of reach is required, includes two forcing screws for short and long pushes even where access may be limited. Jaws interchangeable between both sets.
Where Push Pullers are required as the best pulling solution and threaded holes are not available for attachment. Vehicle components such as heavy duty pinion bearings, side bearings, alternators, generators, power steering and crankshaft pulleys, timing gears and harmonic balancers. Deep set transmission gears, and A/C clutches – Heavy Duty transmission, air compressor gears/pulleys, locking collars on pivot shafts (side and rear dump trailers). Roller gears on tracked vehicles. Tool applications become more evident when tool is displayed.

PneuMasterAir 5 Stage Desiccant Filter/Dryer

Features and Benefits:

  • 5 Stage filtration
  • Easy to fill bowl
  • Includes one gallon of desiccant beads
  • Includes shut off valve
  • Made in the U.S.A.

Five stage filtration includes: 1) 40 micron filter with 9oz metal bowl with sight glass. 2) .01 micron coalescing filter with 9oz metal bowl with sight glass and pop-up indicator. 3) one gallon desiccant dryer that lowers the dew point to -30 deg. F. 4) 3 micron filter with 9oz metal bowl with sight glass to protect from desiccant dusting. 5) 5-125psi regulator with three position adjusting knob. The unit includes gauge, shut off valve and one gallon of desiccant.

Goodall: AntiZap Commercial Booster Upgrade

Add to your booster cable to provide protection for delicate electronics. This 12/24 volt heavy duty antizap with LED control fits cable up to 3/8″ diameter or 2/0 gauge.

Protects while jump starting:

  • EFI and Engine Management System
  • Climate Control
  • Stereo and CD Players
  • GPS and alarms
  • SRS airbags
  • ABS brakes
  • Instrumentation
  • Both donor and dead vehicles

  • ENSURE YOUR VEHICLE IS CORRECTLY GROUNDED BEFORE WELDING The Antizap Surge Protector will not protect against induced current created by incorrect welding procedures. Always follow manufacturer’s instructions. Additional Antizap surge protection may be required for accessories wired into the vehicle’s wiring harness between the point of weld and the battery. If in doubt, seek the advice of an electrician prior to welding. Goodall Mfg.’s warranty is limited to the replacement of a defective product. Goodall shall not be liable for any consequential or incidental damages.

    Goldak Direct Connection Cable
  • 6ft Cables with large direct connection clamp and small grounding clamp
  • Longer cables available by special order
  • Used with Triad 2310, 5600-SI, 4400, PB-44, 902
  • Does NOT include case
  • Empty Carry Case for Triad 2310 Receivers
  • Empty carry case for any Triad 2310 Receiver
  • Constructed from durable, hi-impact xenoy plastic
  • Compact for easy transport and storage
  • No electronics
  • Loading...