Are you looking for:

Quick Changer Oil Drain Plug - 12mm - 1.5

Changing your oil can be a messy, time-consuming task. Waiting for the engine to cool wastes valuable shop time. Spilled hot oil makes a mess and, it can burn!

Now convert every vehicle into a Quick-Changer vehicle.

Now you can eliminate these hassles by replacing your standard oil drain plugs with the innovative Quick Changer oil-drain system. It takes only a few minutes, with no special tools required.

Once you've installed the Quick Changer oil drain valve, you can quickly and easily drain the oil at any time, even when the engine is hot. Actually, draining the oil at high temperatures results in a cleaner flush, since the larger dirt particles drain out with the oil.

No more stripped-out oil pans.

Just connect the drain hose to the Quick-Changer valve, which opens automatically. When finished, disconnect the hose. The valve shuts automatically and cleanly. No more mess. No more spilled oil.

Best of all, by eliminating conventional drain plugs, the Quick Changer system prevents oil-pan threads from being stripped. Your oil pans last longer, saving you money. The valve doesn't extend beyond the threaded portion of the drain.

Just look at these Quick-Changer advantages:

  • Eliminates stripped threads and frozen drain plugs
  • Is fully leak-proof unique design prevents accidental valve openings
  • Draws oil samples quickly and easily, with full control over oil flow
  • Valve and drain assembly fabricated in corrosion-resistant brass
  • Available in metric and U.S. sizes to fit all engines
  • Safe, clean, environmentally friendly operation
  • Meets rigorous independent test lab standards
  • Drains oil faster than conventional drain plugs
Over Inflator and High Volume Indoor/Outdoor System(XDZ)

For precise and consistent tire inflation Haltecs Automatic Tire Inflator is the most advanced tire inflation equipment available today. Safe, reliable and accurate, it is also incredibly easy to use simply set the desired PSI umber on the inflator, connect the hose to the tires valve and thats it, Haltecs Automatic Tire Inflator does the rest. The built-in computer constantly checks the accuracy of the gauge, so theyre virtually maintenance free.
Features:
" Safe and easy to operate
" Inflates or deflates to desired pressure
" Extremely accurate extends tire life
" Faster operation than conventional gauges
" Detachable twelve-foot hose kit with clip on air chuck
" Large, easy to read back-lit digital read out
" Nitrogen capable
" Pressure range of 5-145 PSI
" Power-up pressure of 30 PSI
" Accuracy .3 PSI

INDOOR ONLY SYSTEM

89MDA provides highly accurate, reliable tire inflation for indoor applications
such as vehicle workshops, detailing bays, car rental outlets and service
centers. The 89MDA features an impact-resistant polycarbonate enclosure
and can be used for fixed or mobile operation.
Inflates a single tire at a time.

Safety Precaution
These products, as well as all tire tools, should never be used by persons unless they have been trained properly according to O.S.H.A. Regulation #29CFR 1910.177 entitled Servicing Single-Piece & Multi-Piece Rim Wheels.

PROBLEM:
10% Under-inflation = 4% loss of fuel*
10% Over-inflation = 10% loss of treadwear*
SOLUTION:
HALTEC AUTOMATIC TIRE INFLATOR SYSTEMS
*Fuel and tread wear estimates are based upon EPA and Goodyear studies.

Kiene Hub Socket for Wheel Grabber

Hub socket for use with the Kiene Wheel Grabber.

Hub socket types and usage:

  • WW2151 - Drive Axle - fits most Eaton & Meritor (Rockwell) drive axles
  • WW2153 - Bus Steering Axle & Euclid Trailer - CR1798, Stemco 343-4176 & 343-4080 and Euclid hub caps
  • WW2154 - Trailer Socket - Fits most hub caps with 5-1/2" bolt circle, also Ford F-450/550 drive axles
  • WW2155 - Freuhauf Trailer
  • WW2156 - Pro Par Trailer - fits most hub caps with 6-1/4" and 6-3/4" bolt circle
  • WW2161 - Drive Axle UPS, School Bus - fits Rockwell drive axle with 5-5/16" stud circle and Eaton drive axle with 5-1/4" stud circle.

Galvanic electrolysis can literally freeze hub piloted wheels on their hub. In fact they can become so frozen to their hub that it can become a serious safety problem trying to remove them. Do any of the following techniques sound familiar: Swinging a 20 lb. sledge at the tire (hope your arms and back hold out); Placing a porta power between the frame and wheel (stand back); Loosening the lug nuts and driving the vehicle around the block (and hope the wheels don't fall off before you get back to the garage). It sounds strange, but unfortunately these are some of actual techniques that have been used.

  • Works effectively on steel or aluminum wheels, drive axle, steer axle, or trailer.
  • Great for mobile service work.

About the Wheel Grabber

The Pulling Chains are hooked into the hand holes and their Safety Hooks are attached to the Wheel Grabber. Next, the Hub Socket is centered on the wheel hub. An impact wrench, applied to the Forcing Screw, uniformly tightens the Pulling Chains until the seized wheel is freed - without damage to the wheel or hub! SAFE, QUICK, SIMPLE!

The WHEEL GRABBER comes complete with one Hub Socket of your choice, and one matched set of Pulling Chains of your choice for either steel or aluminum wheels.

Pneumatic Grease System For 120-Lb. Container

Liquidynamics Pneumatic Grease systems for open-top lubricant containers include 60:1 air-operated grease pump, follower plate, drum cover, 10' outlet hose and control handle, and Z-swivel.

With Carry Handle

 

BS-07 Cheetah 5 Gallon Bead Seater

The BS-07 Bead Seater makes seating the most difficult bead not only safe but simple, fast and economical.The BS-07 is equipped with our patented discharge system as well as an ASME certified tank.

The BS-07 has an End Of Tank discharge design, flared discharge barrel and a 2 discharge valve for maximum bead seating power.

Loading...