Features and Benefits:
Test functions:
Features and Benefits:
An inexpensive solution to today’s complex problem of trapped air in vehicle cooling systems. Operated with shop air.
Make your service truck investment as productive as possible with an Express Mobile and eliminate most of the walking associated with trailer servicing. you can easily check all lighting functions and the air brake system (including brake adjustment) in just two minutes, start to finish. That's 20 trailers per hour including set-up, disconnect and all walk-time!
General Specifications | |
Scope of Equipment | Trailer lighting systems testing using a circuit scanning sequence with trailer air brake testing using radio remote-controlled air actuation from behind the trailer. Unit is designed for mounting in a service truck. |
Model Designation | 01011 |
Dimensions | 14.88"H x 16.18"W x 5.38"D overall, including mounting flanges |
Cabinet | 16-gauge steel, base pan 14-gauge. Weldment forms basic structure. Black winkle finish. |
Mounting | Integral mounting flanges on the back and bottom of the cabinet for mounting to floor or interior sidewall of service truck. |
Environmental | Weather, dust, oil, overspray, and dirt resistant. Not intended to be mounted outside of the service body |
Light / Electrical Testing Equipment | |
Light Testing Equipment | Complete built-in Scanner trailer light tester as described below |
Operating Voltage | 12 vdc (nominal) |
Wiring Protocol | SAE 7-Wire |
Scanned Circuits | Left turn (1.5 sec), stop (3.0 sec), right turn (1.5 sec). Circuits are powered one at a time, and the sequence repeats indefinitely |
Freeze feature | "Mode Select" switch starts and stop scanning action as needed. Has center "all off" position |
Switched Circuits | "On-Off Toggle" switches control aux, marker, and tail light circuits |
Circuit Status Indicator | One red LED for each of the six circuits |
Low Battery Indicator | One red LED blinks at 11 volts, on steady at 10 volts |
Circuit Breakers | Aux, mark, tail - one 20 amp auto-reset circuit breaker. Left, stop, right - one 15 amp auto-reset circuit breaker |
Short Circuit Warning | One LED for 20 amp breake, one LED for the 15 amp breaker |
Current Capacity | 34 amps total |
Trailer Connection | SAE 7-Pole socket mounted on cabinet. Light cord and plugs not provided. these vary with the specifics of each installation |
Power Supply | 12 vdc provided by service truck. Requires connection to truck battery's positive terminal, a good ground connection, and connection to the truck's accessory feed (the latter is not a strict requirement but is strongly recommended) |
This adapter has an SAE male plug on one end with the other end stripped and ready for your connector. It is designed to be used wen other Trailer Tester's adapter does not exactly meet your requirements. Purchaser will need to supply and install the wire end.