Changing your oil can be a messy, time-consuming task. Waiting for the engine to cool wastes valuable shop time. Spilled hot oil makes a mess and, it can burn!
Now convert every vehicle into a Quick-Changer vehicle.
Now you can eliminate these hassles by replacing your standard oil drain plugs with the innovative Quick Changer oil-drain system. It takes only a few minutes, with no special tools required.
Once you've installed the Quick Changer oil drain valve, you can quickly and easily drain the oil at any time, even when the engine is hot. Actually, draining the oil at high temperatures results in a cleaner flush, since the larger dirt particles drain out with the oil.
No more stripped-out oil pans.
Just connect the drain hose to the Quick-Changer valve, which opens automatically. When finished, disconnect the hose. The valve shuts automatically and cleanly. No more mess. No more spilled oil.
Best of all, by eliminating conventional drain plugs, the Quick Changer system prevents oil-pan threads from being stripped. Your oil pans last longer, saving you money. The valve doesn't extend beyond the threaded portion of the drain.
Just look at these Quick-Changer advantages:
Use the War-Lok King Pin Lock to secure untethered trailers
Protect expensive cargo stored in a dropped trailer from a would-be thief. The War-Lok King Pin Lock is long lasting and dependable.
Lock Exterior
The cast steel King Pin Lock is nearly impenetrable.
Features:
Lock Interior
Like all WAR-LOK products, the King Pin Lock comes with a nine cylinder disk locking mechanism. This makes it nearly impossible for a thief to pick your lock.
Keying Options
Key your locks differently, alike, or alike to a master key. Furthermore, newly purchased locks can be keyed alike to an existing lock. WAR-LOK Cares About Your Security: WAR-LOK will verify ownership before any key is copied. The WAR-LOK Assembly Team cuts every key in Dallas, Texas, USA.
NOTE: Not for use with RV / 5th Wheel trailers
Equipping brake chambers with BrakeSentry provides drivers and technicians with a significant advantage, a quick and effective means to visually inspect and identify any brake out-of-adjustment conditions conditions that ordinarily remain undetected and expose fleets to the high costs, risks and liabilities associated with trucking's deadliest and most frequently cited defect.
By using BrakeSentry, the industry prescribed applied stroke inspection method can now be performed faster, safer and much more efficiently without the need to crawl under vehicles to physically mark and measure pushrod stroke. A simple visual inspection of stroke measured in 1/4" increments gets the job done.
BrakeSentry reduces brake inspection time from an average 25 minutes per unit to less than 2 minutes. That's more than an 85% savings in labor time!
BrakeSentry reduces costs, risks and liabilities and improves every aspect of brake safety, maintenance and compliance.
BrakeSentry- Advantages, Benefits & Features
BrakeSentry is easily installed in 3-minutes with no special tools required. It is made from a flexible and unbreakable material and fits all brake chambers with external 5/8" push rod. Brake Sentry is non-invasive and non-obstructive, and has a dual function of stroke indicator and brake chamber seal. There is no need to disassemble existing components and its functionality and visibility are not affected by road dirt.
COST BENEFIT ANALYSIS
Example: 50 tandem axle trucks. Each receiving one PM inspection per month. Average time to properly inspect brake stroke adjustment at 25 minutes using the industry prescribed Applied Stroke method. (Requires referencing each brake chamber's push rod while brakes are released, then measuring push rod travel at each wheel position with brakes applied)
Without BrakeSentry:
50 vehicles x 25 minutes = 1,250 or 20.8 hours per month
20.8 hours per month x 12 months = 249.6 hours per year
Average labor rate of $40.00 per hr x 20.8 hours = $832.00 per month
$832.00 per month x 12 months = $9,984.00 per year
The industry prescribed Applied Stroke method can now be done in a fraction of the time without having to mark and measure stroke at each wheel position.
With BrakeSentry:
50 vehicles X 2 minutes = 100 minutes or 1.7 hours per month
1.7 hours per month X 12 months = 20.4 hours per year
$40.00 (labor rate) X 1.7 hrs = $68.00 per month
$68.00 per month X 12 months = $816.00 per year
Comparison:
249.6 hrs/yrW/O BrakeSentry | $9,984.00 per yr | |
With BrakeSentry | $816.00 per yr | 20.4 hrs/yr |
SAVINGS | $9,168.00 per yr | 229.2 hrs/yr |
Each kit contains product to complete one axle / two chambers.
Each kit includes 2 indicators, 2 clips, 2 gauges + 2 brackets & fasteners
8 Gallon Drain Adjusts from 48" to 67" (not shown)
18 Gallon Drain Adjusts from 48" to 71" (shown)