Features and Benefits:

• Wide Spread Crossbar with 3 pin-hole @ 7-1/4” to 9”
• 2 pair of long reach jaws gives user reach options of 5-1/2” and 9-1/2”
• 2 long reach forcing screws (live center) for pushes of 4-1/2” to 10-1/2”
• Accepts shorter jaws from 4534 kit
• 7 Ton version of our Multipurpose Bearing and Pulley Puller Set

Uses Classic "H" Bar style puller block for 7" to 11" applications, has two sets of jaws where reaches of five to nine+ inches of reach is required, includes two forcing screws for short and long pushes even where access may be limited. Jaws interchangeable between both sets.
Where Push Pullers are required as the best pulling solution and threaded holes are not available for attachment. Vehicle components such as heavy duty pinion bearings, side bearings, alternators, generators, power steering and crankshaft pulleys, timing gears and harmonic balancers. Deep set transmission gears, and A/C clutches – Heavy Duty transmission, air compressor gears/pulleys, locking collars on pivot shafts (side and rear dump trailers). Roller gears on tracked vehicles. Tool applications become more evident when tool is displayed.

Features and Benefits:

• Great for accurate measuring of low amps
• Has low reading capability of 1 milliamp (0.001 A)
• Unit also features full function DMM built in
• Data hold, Auto power off and backlit LCD display
• Zippered carrying case and test leads included

With the capability of measuring down to 1 milliamp (.001A), the ESI687 is a great tool for all low current applications. Especially for diagnosing parasitic drains! Clamp opening is large enough to fit over most negative battery cables. Applications: fuel injectors, fuel pumps, electric motors, battery drains, charging systems. Other functions include: Continuity beep, overload protection, clamp opening: 5/8". 9 volt battery is included.

Dump-Lok dump bed braces are an engineering breakthrough in the workplace. Dump-Lok dump bed braces safely hold dump boxes at angles higher than most manufacturer body props, giving workers safe access to more areas underneath the dump bed.

• Sold As A Pair. Intended to be used as a pair
• Used Universally on any brand dump box
• Equipped with high grade, high tensile steel chains to further ensure safe repairs
• Flat Top Model for offset frame beds and trailers
• Fits up to 4-7/16" flange - 3-1/2 is standard

OSHA has issued citations to employers for failing to provide lockout procedures while employees were working under the dump body of dump trucks. They have recognized the hazard of unsecured dump beds and have recommended using an alternative "truck bed brace bracket".

• Overall Height: 21"
• Overall Width: 6"
• Overall Length: 12.75"
• Maximum Capacity (pair): 50,000 lbs

Dump-Lok dump bed braces are an engineering breakthrough in the workplace. Dump-Lok dump bed braces safely hold dump boxes at angles higher than most manufacturer body props, giving workers safe access to more areas underneath the dump bed.

• Sold As A Pair. Intended to be used as a pair
• Used Universally on any brand dump box
• Equipped with high grade, high tensile steel chains to further ensure safe repairs
• Flat Top Model for offset frame beds and trailers
• Fits up to 5-1/2" flange

OSHA has issued citations to employers for failing to provide lockout procedures while employees were working under the dump body of dump trucks. They have recognized the hazard of unsecured dump beds and have recommended using an alternative "truck bed brace bracket".

• Overall Height: 21"
• Overall Width: 6"
• Overall Length: 12.75"
• Maximum Capacity (pair): 50,000 lbs

Features and Benefits:

• Four position regulator allows the operator to match the required power to the job
• Controllable throttle provides easy bolt starting
• 7" extended shank for easy access to truck and off-road equipment tires
• Padded side handle for increased maneuverability
• Easy to use forward/reverse valve for quick directional changes
  
• Maximum torque: 2,000 ft./lbs.

Easy to use forward/reverse valve for quick directional changes.  Ideal for high volume tire work on trucks, buses and heavy equipment.  Working torque range: 370-1600 ft./lbs., 540 blows per minute, Free speed of 4,100 RPM.  Tool is 22.5" in length and weighs 30.5 lbs.