Are you looking for:

7-Ton Multi-Purpose Bearing and Pulley Puller Kit

Features and Benefits:

  • Wide Spread Crossbar with 3 pin-hole @ 7-1/4” to 9”
  • 2 pair of long reach jaws gives user reach options of 5-1/2” and 9-1/2”
  • 2 long reach forcing screws (live center) for pushes of 4-1/2” to 10-1/2”
  • Accepts shorter jaws from 4534 kit
  • 7 Ton version of our Multipurpose Bearing and Pulley Puller Set

Uses Classic "H" Bar style puller block for 7" to 11" applications, has two sets of jaws where reaches of five to nine+ inches of reach is required, includes two forcing screws for short and long pushes even where access may be limited. Jaws interchangeable between both sets.
Where Push Pullers are required as the best pulling solution and threaded holes are not available for attachment. Vehicle components such as heavy duty pinion bearings, side bearings, alternators, generators, power steering and crankshaft pulleys, timing gears and harmonic balancers. Deep set transmission gears, and A/C clutches – Heavy Duty transmission, air compressor gears/pulleys, locking collars on pivot shafts (side and rear dump trailers). Roller gears on tracked vehicles. Tool applications become more evident when tool is displayed.

1" Drive Super Duty Air Impact Wrench

Features and Benefits:

  • Offers the most torque at 2000 ft./lbs.
  • Best power to weight ratio in a 1" air wrench
  • Compact housing design for ease of use in tight spaces
  • Industrial quality and durability in an automotive tool
  • Ideal for spring work, tractor pad removal and off road equipment repair
Most powerful automotive air wrench available! Working torque: 300-1400 ft.-lbs.; blows per minute: 900; free speed: 4,100 RPM; average air consumption: 13 cfm; air inlet thread: 1/2" NPTF; minimum hose size: 1/2"; sound dBA: 101; length: 9.5"; weight: 20 lbs.
Dump-Lok - Dump Body Safety Stand (Standard Top - 4-7/16 in Frame)

Dump-Lok dump bed braces are an engineering breakthrough in the workplace. Dump-Lok dump bed braces safely hold dump boxes at angles higher than most manufacturer body props, giving workers safe access to more areas underneath the dump bed.

  • Sold As A Pair. Intended to be used as a pair
  • Used Universally on any brand dump box
  • Equipped with high grade, high tensile steel chains to further ensure safe repairs
  • Flat Top Model for offset frame beds and trailers
  • Fits up to 4-7/16" flange - 3-1/2 is standard

OSHA has issued citations to employers for failing to provide lockout procedures while employees were working under the dump body of dump trucks. They have recognized the hazard of unsecured dump beds and have recommended using an alternative "truck bed brace bracket".

  • Overall Height: 21"
  • Overall Width: 6"
  • Overall Length: 12.75"
  • Maximum Capacity (pair): 50,000 lbs
Loading...