Are you looking for:

A/C R-134A Manifold Gauge Set with 72in Hose and Couplers

Features and Benefits:

  • Brass manifold with easy-to-grip handles
  • R12/R134a gauges, PSI, and °F Temp
  • 90° manual couplers
  • Rear R134a and 1/2" ACME fittings for holding hoses
  • 72” R134a hose set (1/2” ACME x 14mm)
Dump-Lok - Dump Body Safety Stand (Flat Top - 4-7/16 in Frame)

Dump-Lok dump bed braces are an engineering breakthrough in the workplace. Dump-Lok dump bed braces safely hold dump boxes at angles higher than most manufacturer body props, giving workers safe access to more areas underneath the dump bed.

  • Sold As A Pair. Intended to be used as a pair
  • Used Universally on any brand dump box
  • Equipped with high grade, high tensile steel chains to further ensure safe repairs
  • Flat Top Model for offset frame beds and trailers
  • Fits up to 4-7/16" flange - 3-1/2 is standard

OSHA has issued citations to employers for failing to provide lockout procedures while employees were working under the dump body of dump trucks. They have recognized the hazard of unsecured dump beds and have recommended using an alternative "truck bed brace bracket".

  • Overall Height: 21"
  • Overall Width: 6"
  • Overall Length: 12.75"
  • Maximum Capacity (pair): 50,000 lbs
Tiger Tool Leaf Spring and Shackle Pin Socket Volvo/Mack

Remove and install even the most stubborn threaded leaf spring and shackle pins on Volvo and Mack suspensions. Refer to dimensions to ensure compatibility.


  • Manufactured from high-grade steel to prevent the socket from slipping or spinning under extreme loads
  • Black oxidize finish for extended durablity
  • 1/2" Drive

Shipping Weight: 1 lb

Kiene Splined Shaft 1 3/4 in x .983 in Pilot for Clutch Caddy

Kiene 1-3/4" Diameter Splined Shaft with 0.98" diameter pilot for the Clutch Caddy

  • For 0.980" Pilot
  • Steel construction not plastic

Clutch Caddy Sold Separately

Automatic Transmission And Engine Oil Pressure Tester With Two Gauges
Features and Benefits:
  • Check oil pressure in automatic transmissions and engines
  • Adapters provide coverage of most domestic and imported cars and light trucks including late models
  • Supplied with two gauges calibrated as follows:
  • Large Gauge: 0-600PSI, 0-4,000 kPa, 0-40 Bar
  • Small Gauge: 0-50PSI, 0-3.5 Bar
Large gauge can be used for all applications and has a hang- up hook. Use small gauge for more accurate reading of engine oil pressure where maximum oil pressure does not exceed 50 RS.I. (3.5 BAR). Includes 6 feet of oil proof hose and 10 assorted fittings. Supplied in durable vinyl pouch for store display and tool box storage. Full instructions provided. Now includes an adapter with two grooves, Cat. No. 34573, for use on most Asian and some American and European vehicles. Thread size is 8MM-1.00 Male x 1/8" NPT Female.
Loading...