Are you looking for:

Quick Changer Oil Drain Plug - 26mm -1.5

Changing your oil can be a messy, time-consuming task. Waiting for the engine to cool wastes valuable shop time. Spilled hot oil makes a mess and, it can burn!

Note: Not Compatible with Composite Oil Pans

Now convert every vehicle into a Quick-Changer vehicle.

Now you can eliminate these hassles by replacing your standard oil drain plugs with the innovative Quick Changer oil-drain system. It takes only a few minutes, with no special tools required.

Once you've installed the Quick Changer oil drain valve, you can quickly and easily drain the oil at any time, even when the engine is hot. Actually, draining the oil at high temperatures results in a cleaner flush, since the larger dirt particles drain out with the oil.

No more stripped-out oil pans.

Just connect the drain hose to the Quick-Changer valve, which opens automatically. When finished, disconnect the hose. The valve shuts automatically and cleanly. No more mess. No more spilled oil.

Best of all, by eliminating conventional drain plugs, the Quick Changer system prevents oil-pan threads from being stripped. Your oil pans last longer, saving you money. The valve doesn't extend beyond the threaded portion of the drain.

Just look at these Quick-Changer advantages:

  • Eliminates stripped threads and frozen drain plugs
  • Is fully leak-proof unique design prevents accidental valve openings
  • Draws oil samples quickly and easily, with full control over oil flow
  • Valve and drain assembly fabricated in corrosion-resistant brass
  • Available in metric and U.S. sizes to fit all engines
  • Safe, clean, environmentally friendly operation
  • Meets rigorous independent test lab standards
  • Drains oil faster than conventional drain plugs
Express Mobile - Light and Air Brake System Tester

Make your service truck investment as productive as possible with an Express Mobile and eliminate most of the walking associated with trailer servicing. you can easily check all lighting functions and the air brake system (including brake adjustment) in just two minutes, start to finish. That's 20 trailers per hour including set-up, disconnect and all walk-time!


  • Designed to be mounted in your service truck. Perfect for on-site trailer readiness inspection
  • Radio remote-controlled air brake tester saves tons of time.
  • Built in Scanner lighting tester operates lights in sequence. Check them all in a single walk around
  • Test airbrake and lighting functions in minutes
  • Integral mounting flanges make installation a snap!
  • Sourced by your service truck's electrical and service air systems
  • User supplied air hoses and trailer cable
  • Includes spare remote
    General Specifications
    Scope of Equipment Trailer lighting systems testing using a circuit scanning sequence with trailer air brake testing using radio remote-controlled air actuation from behind the trailer. Unit is designed for mounting in a service truck.
    Model Designation 01011
    Dimensions 14.88"H x 16.18"W x 5.38"D overall, including mounting flanges
    Cabinet 16-gauge steel, base pan 14-gauge. Weldment forms basic structure. Black winkle finish.
    Mounting Integral mounting flanges on the back and bottom of the cabinet for mounting to floor or interior sidewall of service truck.
    Environmental Weather, dust, oil, overspray, and dirt resistant. Not intended to be mounted outside of the service body
    Light / Electrical Testing Equipment
    Light Testing Equipment Complete built-in Scanner trailer light tester as described below
    Operating Voltage 12 vdc (nominal)
    Wiring Protocol SAE 7-Wire
    Scanned Circuits Left turn (1.5 sec), stop (3.0 sec), right turn (1.5 sec). Circuits are powered one at a time, and the sequence repeats indefinitely
    Freeze feature "Mode Select" switch starts and stop scanning action as needed. Has center "all off" position
    Switched Circuits "On-Off Toggle" switches control aux, marker, and tail light circuits
    Circuit Status Indicator One red LED for each of the six circuits
    Low Battery Indicator One red LED blinks at 11 volts, on steady at 10 volts
    Circuit Breakers Aux, mark, tail - one 20 amp auto-reset circuit breaker. Left, stop, right - one 15 amp auto-reset circuit breaker
    Short Circuit Warning One LED for 20 amp breake, one LED for the 15 amp breaker
    Current Capacity 34 amps total
    Trailer Connection SAE 7-Pole socket mounted on cabinet. Light cord and plugs not provided. these vary with the specifics of each installation
    Power Supply 12 vdc provided by service truck. Requires connection to truck battery's positive terminal, a good ground connection, and connection to the truck's accessory feed (the latter is not a strict requirement but is strongly recommended)
  • Kiene Mobile Diesel Engine Rebuild Stand -5,000 lb. Capacity

    The Kiene Mobile Diesel Engine Rebuild Stand gives the mechanic a safer, more productive working environment

    The Mobile Engine Stand provides a secure, stable support for the engine at a comfortable working height. It also makes servicing and rebuilding far easier.

    • Sturdy steel gears support the engine - No hydraulic pump or leak down on this stand
    • Gears provide 3 ratios for lifting the engine to horizontal
    • Easy engine access is provided by two plane Vertical / Horizontal positioning

    Fast and Easy Positioning

    2-Plane engine positioning (vertical and horizontal) provides a 360 degree swing radius and optimum engine accessibility. Hand crank with speed reducer makes positioning easy.

    Solid Working Stability

    Angled leg construction provides a steady stand and enables the mechanic to get closer to the work

    Great mobility

    Moves easily on heavy-duty 5" diameter casters. Brake mechanism enables mechanic to secure stand in place quickly.

    Navistar Diamond Logic Builder OEM Software

    NAVISTAR® DLB FLEET

    Diagnostic Software

    International® Diamond Logic® Builder Fleet

    Basic Functions

    • Read Fault and clear diagnostic fault codes
    • View vehicle parameters and features

    Advanced Features

    • Bi-directional control of electrical components
    • View switch location and cluster configuration
    • View wiring diagrams
    • Automatic module detection<
    • Graph parameters<
    • Record snapshots

    Compatible Vehicles

    • International® 4200/4300/4400 Series
    • International® 7000 Series
    • International® 8000 Series
    • International® CF Series (Cluster faults, Test all gauges except fuel, Odometer reset)

    Diamond Logic Builder™ (DLB) provides high performance diagnostics for the electrical systems on high performance International trucks and IC Buses. DLB Fleet displays vehicle signals in graphical and text format. This software also reads and displays vehicle diagnostic trouble codes as well as vehicle features and parameters.

    Minimum Requirements:

    • 150MB of free hard disk space
    • An Internet connection

    Recommended Requirements:

    • Pentium 4 class process with a minimum 1 GHz of speed
    • 512 MB of RAM
    • 150MB of free hard disk space
    • Operating System of Windows 7, XP, 2000 or Vista
    • One or more RP1210A compatible communication devices
    • Any type of high speed Internet connection

    Recommended Adapters:

    • NEXIQ™ Technologies – USB­Link2
    • Dearborn Group Technologies – DPA IV, DPA IV+
    • Noregon® Systems, Inc. – DLA+, DLA+ Wireless

    Communication Link Drivers:

    • DLB uses standard RP1210A drivers for communication. The drivers are specific to the communications device and are not installed with DLB.

    User Permissions:

    Diamond Logic Builder has different tiered permission levels allowing for more advanced use of the software.

    • Level 1 (Diagnostics) – L1 is included with active product key.
    • Level 2 (Diagnostics and Parameter Programming) – L2 access requires completion of web based training for each user.
    • Level 3 (Diagnostics, Parameter Programming and Advanced Logic) – L3 access requires completion of Instructor Led training for each user.
    Loading...