Are you looking for:

2 Jaw, 13 Ton Mechanical Grip-O-Matic Puller

Features and Benefits:

  • This 2 jaw puller has a 13 ton capacity
  • Maximum reach: 11"; Maximum spread: 12"
  • Screw size: 13/16" 16 thread x 12"
  • Jaw thickness: 9/16"; Jaw width: 1"
These pullers are forged from quality steel, heat treated, and subjected to rigorous tests which exceed their rated capacity.  This complete line of gear and bearing pullers, enables you to remove and install parts for fast, effective repairs.
8 Quart Painted Measure with Flexible Spout

Features and Benefits:

  • Designed for one hand operation
  • Thumb operated valve controls flow, flip action locks valve open
  • 14" flexible metal spout with tapered 1/2" OD tip swings into the necessary angle for hard-to-reach jobs
  • Recessed bottoms drain fully and guard against puncture
  • Rolled edge top helps prevent oil spillage

11-1/2" overall height.

Radiator and Radiator Cap Pressure Test Kit

Features and Benefits:

  • For use in testing radiators
  • For use in testing radiator caps
  • Confirms radiator leaks
  • Confirms cooling system leaks
  • Test radiator caps for proper operation
Multipurpose Bearing and Pulley Puller Set
Features and Benefits:
  • 2 – Forcing Screws (Live Center): 3/4"-16 x 6-11/16" and 3/4"-16 x 5"
  • 2 – Cross-bar Yokes: 3 pin-hole at 3-1/4" to 5-1/2", 2 pin-hole at 2-3/8" to 3-3/8" 2 – Clamp Bolts
  • 3 – Pairs of Puller Jaws: 1-3/8" Max, 1-5/8" Max, 1-3/4" Max
  • 1 – Pair of Jaw Pins with Ball Spring
  • 3 – Pairs of Capped Bolts
  • Spread: 3" to 5", Reach: 1" to 2-1/4"
  • Housed in a blow-molded plastic storage case
This multipurpose bearing and pulley puller set is for a wide range of pulling jobs, including: bearings, alternators, generators, power steering and crankshaft pulleys, timing gears, and harmonic balancers.This set includes drop-forged components, which can be used in a variety of combinations.
Goldak Fiberglass Push Rod

Versatile, plastic coated fiberglass pushrod used in both sewer line locating and plastic conduit locating

  • Durable construction and quality craftsmanship for workhorse performance
  • 3/8" diameter and 400 ft. in length
  • Comes with "Quick Change Roller Flex System" for maximum efficiency
  • Push through lines easier with "Roller Flex" roller ball
  • Locate lines as small as 1" with any of Goldak's SR series in-line transmitters
  • Use in-line transmitters to reduce the risk of hang-ups, jams, broken rods, and loss of valuable transmitters
  • Loading...