Are you looking for:

Dump-Lok - Dump Body Safety Stand (Flat Top - 6 in Frame)

Dump-Lok dump bed braces are an engineering breakthrough in the workplace. Dump-Lok dump bed braces safely hold dump boxes at angles higher than most manufacturer body props, giving workers safe access to more areas underneath the dump bed.

  • Sold As A Pair. Intended to be used as a pair
  • Used Universally on any brand dump box
  • Equipped with high grade, high tensile steel chains to further ensure safe repairs
  • Flat Top Model for offset frame beds and trailers
  • Fits up to 6" flange

OSHA has issued citations to employers for failing to provide lockout procedures while employees were working under the dump body of dump trucks. They have recognized the hazard of unsecured dump beds and have recommended using an alternative "truck bed brace bracket".

  • Overall Height: 21"
  • Overall Width: 6"
  • Overall Length: 12.75"
  • Maximum Capacity (pair): 50,000 lbs
10-Ton Capacity Air End Lift Jack

Features and Benefits:

  • Adjustable lifting saddles and an extra wide stance for extra stability
  • 10 ton lifting capacity at 200 PSI air supply
  • Lifting range is 13" to 52" with a 14" reach
  • An automatic mechanical safety catch engages in five height positions, it must be manually released to lower the load
  • Two large swivel casters and pneumatic tires make it easy to maneuver, even on loose gravel
Just roll the OTC1590 under the load, adjust the lifting saddles, connect an air line and squeeze. Ten tons of lifting capacity! Just pull a pin and you can re-adjust the height of the lifting saddles. The width between them is also adjustable. Saddle width: 29" - 41-3/4"; height: 67-1/2"; width: 41", length: 36" and distance from lift arm to floor support: 12-1/2"
Kiene Flywheel Adapter for Clutch Caddy

The Kiene Flywheel Adapter for the Clutch Caddy provides a safe way to install and remove flywheels.

  • Works with pot "Deep Dish" and flat flywheels used with 14" and 15-1/2" clutches
  • Quickly remove the clutch holder assembly - install the flywheel adapter and you are ready for action

Kiene Clutch Caddy sold separately

TC-16AC Automated Filter Crusher

The TC-16 and 16AC deliver 64,000lbs of crush force to handle multiple automotive, truck and industrial filters. The AC option allows the operator to push the button and walk away.

Stand design makes the placement of a 55-gallon waste drum easy. Heavy construction and 120V or 220V motor will insure years of dependable operation. 15 x 15 x 20 crushing chamber.

specifications: 40" wide x 40" length x 104" height ; 1500 lbs

TSI TC-50 Gas Powered Tire Cutter

The TC-50 is designed to cut passenger and light truck tires, 17 and smaller, into 4 pieces at the rate of 60 per hour. The patented shear blades work on a zero clearance design for a clean cut.

Two-handle valve system keeps operator's hand away from the blades while cutting for added safety. The TC-50 is easy to operate, low maintenance, dependable and designed for years of service.

Ships LTL
Pallet Specifications: 55" wide x 66" length x 62" height; 1128 lbs.

Loading...