Tire Service Equipment: Wheel Stud Remover And Installer

Until now, the only right way to replace studs was to remove the brake shoes and hub, take the hub to a shop press, then replace the seals and realign the bearings. To save time, you could hammer the stud out (and risk cracking the hub) then air-wrench a new stud in (and risk stripping the threads).
But the PakPress tool lets you do it right, and fast. Now you can take a stud off, or put one back on, in just 10 seconds, without disturbing the hub – or the seals, bearings or brakes.

• Portable. The hand held PakPress brings the power of a 10-ton shop press right to the truck.
• Easy to use. Simple press-out/press-in operation can be performed by any mechanic.
• Industrial strength. Cast, heat-treated frame is made with unique, super-tough alloy/nickel formulation.
• Easy to connect. Attaches to any standard air/hydraulic pump.
• Adapter Set. Lets you replace studs on virtually any kind of outboard hub, including piloted hubs and hubs with broken studs.
• Works on any outboard hub
• Reduces a 2 hour job to 20 minutes
• Avoids potential damage to seals and bearings