Norco: 1/2 Ton High Lift Wheel Dolly

Norco: 1/2 Ton High Lift Wheel Dolly

For the removal and installation of single, tandem and duplex tires and wheels which are mounted on trucks that are supported above ground level.

• Heavy duty lift arms made with ball bearing conveyer rollers which allow easy rotation of wheels for alignment with bolt pattern
• 71/2" of side to side lift arm adjustment eliminates the trial and error method of aligning the rims lug holes with the wheel drum
• Total lift height of 411/4"
• A 1500 pound capacity heavy duty winch with 5 to 1 gear ratio provides ease of operation
• The winch gear design acts as a brake and allows the load to be lowered incrementally if desired and without the need for constant hand pressure against the crank handle
• A hydraulic jack tilts the lift arms in order to match the angle of the spindle
• Safety chain provided to secure tires and wheels to the dolly
• Maneuverability is made easy by means of two rear mounted ball
  bearing swivel caster wheels. The caster wheels include a locking mechanism which can prevent the dolly from moving