- APPLICATION CARD FOR THE MPC, PRO-LINK PLUS AND PRO-LINK GRAPHIQ
This unique diagnostic application is for use with Allison World Transmissions (models B-300, B-400, B-500 and the MD and HD transmissions). The application card also contains coverage for Allisons Commercial Electronic Control (CEC 1) units on applicable MT, HT, V730, CLBT and DP models.
FEATURES
Supports WTEC II & III and CEC I TCMs
Data list parameters
Defined diagnostic codes/Clear Codes
I/O wire status and shift inhibits
General Purpose Inputs (GPI) defined
View Customer Modifiable Constants (CMC)
INCLUDES
Application card
Manual
PCMCIA
The Allison diagnostic PCMCIA card provides technicians with the ability to quickly diagnose, and perform action request functions on Allison World Transmission Electronic Control (WTEC) systems. The PCMCIA card inserts into the Multi-Protocol Cartridge (MPC), which is used with NEXIQ's Pro-Link Plus. Updates to any of NEXIQ's PCMCIA cards can be performed by reflashing the card with the latest software via a floppy disk from NEXIQ using a personal computer.
ADDITIONAL FEATURES
View diagnostic data list
Create and save custom data lists
Display active and inactive codes
Clear active and inactive codes
View shift inhibits
Enable clutch test to perform clutch pressure test or stall test in higher gears
Activate fast adaptive mode to allow ECU to adjust quickly to optimum shift characteristics
Reset unadapted shifts to initial factory shift calibration settings
Reset throttle calibration to ensure proper TPS adjustment
Reset autodetect (WTEC III only) to verify presence of retarder, oil level sensor, throttle and engine coolant temperature sources
Perform snapshot data recording and playback to capture intermittent problems
Display I/O wire assignments and functions (enabled/disabled)
View ECU EEPROM calibration information
Read Customer Modifiable Constants (CMCs)
Update for Allison Diagnostic PCMCIA card: 809005F (floppy diskette)
APPLICATION CARD FOR THE MPC, PRO-LINK PLUS AND PRO-LINK GRAPHIQ
This unique diagnostic application is for use with Allison World Transmissions (models B-300, B-400, B-500 and the MD and HD transmissions). The application card also contains coverage for Allisons Commercial Electronic Control (CEC 1) units on applicable MT, HT, V730, CLBT and DP models.
FEATURES
Supports WTEC II & III and CEC I TCMs
Data list parameters
Defined diagnostic codes/Clear Codes
I/O wire status and shift inhibits
General Purpose Inputs (GPI) defined
View Customer Modifiable Constants (CMC)
INCLUDES
Application card
Manual
PCMCIA
The Allison diagnostic PCMCIA card provides technicians with the ability to quickly diagnose, and perform action request functions on Allison World Transmission Electronic Control (WTEC) systems. The PCMCIA card inserts into the Multi-Protocol Cartridge (MPC), which is used with NEXIQ's Pro-Link Plus. Updates to any of NEXIQ's PCMCIA cards can be performed by reflashing the card with the latest software via a floppy disk from NEXIQ using a personal computer.
ADDITIONAL FEATURES
View diagnostic data list
Create and save custom data lists
Display active and inactive codes
Clear active and inactive codes
View shift inhibits
Enable clutch test to perform clutch pressure test or stall test in higher gears
Activate fast adaptive mode to allow ECU to adjust quickly to optimum shift characteristics
Reset unadapted shifts to initial factory shift calibration settings
Reset throttle calibration to ensure proper TPS adjustment
Reset autodetect (WTEC III only) to verify presence of retarder, oil level sensor, throttle and engine coolant temperature sources
Perform snapshot data recording and playback to capture intermittent problems
Display I/O wire assignments and functions (enabled/disabled)
View ECU EEPROM calibration information
Read Customer Modifiable Constants (CMCs)
Update for Allison Diagnostic PCMCIA card: 809005F (floppy diskette)
